Tiller Help

[david w.]

Here is the oak pyramid bow i am working on.  The backdrop is bad in the picture so it might be hard to see.  Thanks for all the help!

[attachment deleted by admin]

[Dano]

You need to get more of the limbs working near the fades.

[Skeaterbait]

If it were mine I would start by getting more bend in the first 6-8 inches of the fades and see what happens on the rest of it from there.

[Justin Snyder]

After the fades it appears to be a little stiff on the right outer limb.

[Skeaterbait]

Dang it, outgunned by Dano.

[david w.]

OK thanks every one.  I have had expeience with the riser pooping off because of the bow working in the handle but i will try to get it working in the fades.  If it pops of i will epoxy it back on and no big deal

[Kegan]

What was alrady said. Pyramid bows like circular tillers .

Can you tie a string between the nocks to simulate the bow string, and to help see how balanced the limbs are?

[david w.]

After the fades it appears to be a little stiff on the right outer limb.

Yes it does i will fix that
thanks

[Dano]

Dang it Lonnie, I don't even own a gun Want to tho.