Author Topic: Heat treating Buffalo River  (Read 7726 times)

0 Members and 1 Guest are viewing this topic.

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Heat treating Buffalo River
« on: June 27, 2008, 11:12:15 am »
  So i tyred to heat treat some buffalo River chert last night and this morning when i looked at it there was no change in texture, only a change in color went from a dull light brown color to a Rusty color brown.
 I cooked it in a pan of sand in the oven at 550' for one and a half hrs. The Kansas chert i heat treat changed and became waxier. But its the buffalo river that i would like to get waxier.
 Anyone ever had any success heat treating Buffalo River?
Mililani Hawaii

Offline david w.

  • Member
  • Posts: 1,823
Re: Heat treating Buffalo River
« Reply #1 on: June 27, 2008, 03:45:50 pm »
i have never heat treated and i can hardly knap but 1 1/2 hours seems way to short
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: Heat treating Buffalo River
« Reply #2 on: June 27, 2008, 03:56:11 pm »
it was in the oven about 7 hrs, tuck 5 hrs to get the temp up to 550
Mililani Hawaii

Offline david w.

  • Member
  • Posts: 1,823
Re: Heat treating Buffalo River
« Reply #3 on: June 27, 2008, 04:03:09 pm »
oh well i never heat treated so i really cant help
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Heat treating Buffalo River
« Reply #4 on: June 27, 2008, 08:41:01 pm »
Jesse .....I cant find a Thing on Buffalo River....but I did find this....in case it may be helpful in the Future....why do you want to Heat Treat it anysways??? Everything I have read says that it flakes great without Heat....is it for the Color Change???

Agate Brazilian - 450-500

Agate India - 500 

Agate Mexican - 500 

Agate Montana - 550 

Agate Moss - 450 

Alibates - 425-500

Bloodstone - 500

Burlington - 600-650 

Coral - 450-600 

Dacite - NONE 

Flint Ridge - 500-600 (set the roaster at 200 degrees for two hrs then increase until the max temp. is reached and leave it for 12 to 24 hours)

Flint River - 375 -450 

Ft. Hood - 400-550 

Georgetown - 450 

Jasper Red - 500 (very hard stuff to work)

Jasper Sunset 450-475 

Jasper Fancy 450-500 

Jasper Picture 525 

Kay County - 500-600 

Knife River Flint - 350 (Do NOT overheat or it will pot lid)

Limestone - 550- plus (not good material) 

Novaculate - 700-900 

Obsidian - NONE 

Pedernales - 450 

Petrified Wood - 300-450

As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Heat treating Buffalo River
« Reply #5 on: June 28, 2008, 01:16:12 pm »
  Jesse, when I heat treat the local chert we have here. I just put the spalls in the toaster oven, turn it all the way on (500dgs) and let it cook all night. I unplug it in the morning when I go to work and it is cool when I get home. You can usually hear the diferrence when you smack it.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: Heat treating Buffalo River
« Reply #6 on: June 30, 2008, 12:02:19 pm »
The Buffalo River chert i heated last weekend did change some, it napped better and was less grainy.
 Thanks for the list Michael thats a good reference, not only for me but for anyone.
Mililani Hawaii