Author Topic: Cracks on the back  (Read 3957 times)

0 Members and 1 Guest are viewing this topic.

Offline DirtyDan

  • Member
  • Posts: 373
Cracks on the back
« on: May 23, 2008, 02:37:11 pm »
Lately I have been having trouble with my osage self bows getting longitudinal cracks on the back after I get them down to one ring and floor tiller them.  Is there any way to stop this.  I know it does not affect the performance, but it just looks bad.

Dan

Offline Dano

  • Member
  • Posts: 1,349
Re: Cracks on the back
« Reply #1 on: May 23, 2008, 02:43:09 pm »
I'd seal the back with shellac, it sounds like the wood is still a little wet.
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Cracks on the back
« Reply #2 on: May 23, 2008, 02:46:29 pm »
If there is a long time between chasing the ring and finishing the bow you need to seal the back. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Online Eric Krewson

  • Member
  • Posts: 5,417
Re: Cracks on the back
« Reply #3 on: May 23, 2008, 04:28:03 pm »
Yep, your wood is a little green or you live in an area with very low relative humidity. Usually seasoned osage is very stable but sometimes will get a few checks on the back. Superglue the checks and they won't be a problem.

Far East Archer

  • Guest
Re: Cracks on the back
« Reply #4 on: June 26, 2008, 08:52:50 am »
Hey guys I didnt want to start a new thread...because this one already has the right topic!  ;D

Well, I have some osage that is dried quite well, but when I heat treated it I found the back would make the same cracks described above. Can I seal the back to prevent this or is there some other technique?

Thanks!
Alex

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: Cracks on the back
« Reply #5 on: June 26, 2008, 09:10:56 am »
If the wood is still fairly green it will do that when you heat the belly.If the wood is less than 2/3 years old I always steam first  to straighten and put in reflex then use the heat gun and yes I seal the back.  :) I am taking about Osage.Hickory and most white wood aren't as bad but I still seal
them.
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Far East Archer

  • Guest
Re: Cracks on the back
« Reply #6 on: June 26, 2008, 09:13:58 am »
Thanks Pappy!  :)
I'll try that out today, will polyurethane work?

Alex

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: Cracks on the back
« Reply #7 on: June 26, 2008, 09:19:53 am »
Ya that is what I use most of the time. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Far East Archer

  • Guest
Re: Cracks on the back
« Reply #8 on: June 26, 2008, 09:24:00 am »
Great!
Thanks again, really a life saver haha  :D

Alex

DCM

  • Guest
Re: Cracks on the back
« Reply #9 on: June 26, 2008, 11:29:53 am »
It may help to remember wood will acclimate to whatever the humidity level is at the time.  So a stave seasoned down to 6% moisture content in winter can gain back up to 10% or more in the summer.  Not a heck of a lot more, but enough that very rapid drying of a thicker area can still cause drying checks, ie. the "cracks" being discussed.