« previous next »
Pages: [1]

Author Topic: Noisy arrow  (Read 6572 times)

0 Members and 1 Guest are viewing this topic.

Offline Hickoryswitch

  • Member
  • Posts: 339
Noisy arrow
« on: July 11, 2008, 10:06:42 pm »
I just finished a cane arrow with turkey feathers and it is a little noisy. It's also equipped with a trade point. I'm not sure what's causing it to sorta hiss while it flies. Has anyone had this problem and how can I solve it? The feathers are about 3/4 of an inch tall and 5'' long. Thanks
Logged
Wayne Silverthorn

Offline sailordad

  • Member
  • Posts: 5,045
Re: Noisy arrow
« Reply #1 on: July 11, 2008, 11:01:43 pm »
how are the fletchings cut?

are they shield cut or taper cut?
i have some that are taper cut that hiss when in flight.
shield cut are supposed to be quiter.


                                                                    peace,
                                                                           tim
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Noisy arrow
« Reply #2 on: July 12, 2008, 12:02:40 am »
IMO, turkey feathers are noisy no matter what.  However, the shorter the feather is near the nock, the quieter it gets.....basically, the shield cut as sailordad mentioned.  You can also decrease the distance between nock and back of the feather...it seems to make the arrow quieter as well.

In general, very stiff, tall, and "pointy back" feathers are very noisy...at least that's my experience.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Noisy arrow
« Reply #3 on: July 12, 2008, 12:34:57 am »
  I don't think it matters, IMO. I've stood down range, catching them , and you don't hear the sound until it's too late.

  I have to be watching it leave the bow at least 40 yards out of a 35# bow to be able to attempt to hang onto one.

 I had one ,stupid doe, that I missed 4 times at 30 yards. It kept coming back and I finally shot it the fifth time.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Noisy arrow
« Reply #4 on: July 12, 2008, 01:41:04 am »
I have noticed secondary and tail feathers are a bit noisier than primary feathers. Also, if your fletching has a pointed trailing edge it will hiss.    Like Eddie, I don't think it matters. The sound of feathers fluttering in the breeze is quite common in the deer woods.  ;)    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hickoryswitch

  • Member
  • Posts: 339
Re: Noisy arrow
« Reply #5 on: July 12, 2008, 09:08:25 am »
Thanks everyone. The feathers look sorta like a pope and young. I trimmed them by hand and tha was just the shape they came out. As long as they won't cause a problem I just won't worry about the noise.       

     Thanks

Logged
Wayne Silverthorn

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Noisy arrow
« Reply #6 on: July 12, 2008, 09:38:53 am »
Like Pat said, if you have that point on the back, they hiss. 3/4" is pretty tall, too. I like hissing arrows myself, though-just like the sound of them.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline cracker

  • Member
  • Posts: 3,123
Re: Noisy arrow
« Reply #7 on: July 12, 2008, 11:13:02 am »
I just read everyones opinions and it seem a general agrreemet that long featers towards the nock make noise.This raises the question would a banana cut be quieter since the feathers near the nocks would be shorter?R.C.
Logged
If we can't help each other what is the point of being here?

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Noisy arrow
« Reply #8 on: July 12, 2008, 11:17:46 am »
Cracker, yep-I just don't like the looks of 'nanner cut feathers myself, and they aren't great at steering broadheads.The shield cut is a good compromise. The swallowtail point on the back is what usually causes a lot of the noise.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline sailordad

  • Member
  • Posts: 5,045
Re: Noisy arrow
« Reply #9 on: July 12, 2008, 12:55:37 pm »
yup but they sound so coooool 8) 8)

i love the sound,nothing better than hearing that "phffffffffffttttt" sound when an arrow is in flight.

 
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Noisy arrow
« Reply #10 on: July 12, 2008, 01:05:00 pm »
  Banana cut seems real loud to me. I think maybe because they stick up high in the center.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline cracker

  • Member
  • Posts: 3,123
Re: Noisy arrow
« Reply #11 on: July 12, 2008, 06:17:37 pm »
Quote from: Hillbilly on July 12, 2008, 11:17:46 am
Cracker, yep-I just don't like the looks of 'nanner cut feathers myself, and they aren't great at steering broadheads.The shield cut is a good compromise. The swallowtail point on the back is what usually causes a lot of the noise.
Yep I agree on the looks. R.C.
Logged
If we can't help each other what is the point of being here?
Pages: [1]
« previous next »