Author Topic: Best bow woods in compression?  (Read 12776 times)

0 Members and 1 Guest are viewing this topic.

Offline Red Dwarf

  • Member
  • Posts: 121
Re: Best bow woods in compression?
« Reply #15 on: June 18, 2008, 03:35:09 pm »
Thanks guys for the help.

Would love to try osage but unfortunately I do not have access to it up here in BC . I do have a little bit of yew; it is not very good quality but may be OK for slats.
Ipe sounds interesting, any special precautions when working with it?

Red Dwarf

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Best bow woods in compression?
« Reply #16 on: June 18, 2008, 03:41:29 pm »
Red, some folks are highly sensative to the dust of ipe and other tropical woods. Take precautions when using  it.  ;) Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Kegan

  • Member
  • Posts: 2,676
Re: Best bow woods in compression?
« Reply #17 on: June 18, 2008, 07:47:39 pm »
My father had me look up ipe for decking a few years ago (before I learned it made such great bows). In seven different sites I read that ipe is extremely poisonous to the lungs and should be used with a mask in a ventillated area. Makes a terrific bow though.

Offline bcbull

  • Member
  • Posts: 541
Re: Best bow woods in compression?
« Reply #18 on: June 18, 2008, 09:23:51 pm »
 i love workin with the ipe makes dome dandy bow  but i wont work it without my dust mask  and a pair of pig skin leather gloves on  get 1 lil sliver and dont get it all out  you ll very quickly figure out what haha man that stuff swees burns hurt s to be honest   be safe !!! :-[