« previous next »
Pages: [1]

Author Topic: nasty grained osage  (Read 2110 times)

0 Members and 1 Guest are viewing this topic.

Offline david w.

  • Member
  • Posts: 1,823
nasty grained osage
« on: June 02, 2008, 05:00:11 pm »
i have a 1" piece of osage that i posted about a while ago.  well it is warped to the side like a c so i wanted to turn it over and turn it into reflex but the grain would be nasty.  So can i linen back it and use it? i was going for a bendy handle d bow 50# @ 26"
Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline Kegan

  • Member
  • Posts: 2,676
Re: nasty grained osage
« Reply #1 on: June 02, 2008, 07:39:49 pm »
How wide is it? If it's narrow enough, you could straighten it with heat/steam back straight. Probabaly would be safer grain wise that way.
Logged

Offline david w.

  • Member
  • Posts: 1,823
Re: nasty grained osage
« Reply #2 on: June 02, 2008, 07:46:19 pm »
i thnk i will do that its sounds alot better.  its about 7/8" wide. its a scrap piece but its too good to waste and the grain on this is perfectly straight and i didnt want to turn it on its side so i think i will see if my dad can get a heatgun from work.

Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline Kegan

  • Member
  • Posts: 2,676
Re: nasty grained osage
« Reply #3 on: June 02, 2008, 07:48:14 pm »
I've heard Osage responds well to bending with heat, and Ive done it with hickory, which is an absolute bear to bend.
Logged
Pages: [1]
« previous next »