Author Topic: new oak bow, from a stave not a board  (Read 11955 times)

0 Members and 2 Guests are viewing this topic.

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Re: new oak bow, from a stave not a board
« Reply #15 on: May 26, 2008, 10:20:50 pm »
eddie- i went there last year, for the spring shoot. rained all day if you remember, i didnt see much for selfbows there, i did see a couple, i wonder if they were yours. i did hope to sell one or two their either this fall or the spring shoot.  i only stayed one day last year, didnt even finish the shoot. it wasnt quite the same as it was several years ago when i was goin every year. - Ryan
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: new oak bow, from a stave not a board
« Reply #16 on: May 26, 2008, 10:44:28 pm »
do any of yall know what water oak is? thats the only name i know for it. i got a ton of it around here, just wonderin if it would make a good bow.
lets just shoot it

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Re: new oak bow, from a stave not a board
« Reply #17 on: May 26, 2008, 10:51:37 pm »
i am pretty sure its in the white oak family. should make a fine bow. all the water oak around me is riddles with knots though, it doesnt seem to grow very large around me either

this it?    - Ryan

[attachment deleted by admin]
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: new oak bow, from a stave not a board
« Reply #18 on: May 27, 2008, 06:58:17 am »
Nice looking bow, I always wondered about building a bow from an oak stave.  Nice work.
Traverse City, MI

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: new oak bow, from a stave not a board
« Reply #19 on: May 27, 2008, 07:12:28 am »
yup. thats deffinently it. around here it grows streight and pretty knot free.
lets just shoot it

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: new oak bow, from a stave not a board
« Reply #20 on: May 27, 2008, 08:40:47 am »
Good lookin' bow, Ryan.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: new oak bow, from a stave not a board
« Reply #21 on: May 27, 2008, 11:24:37 am »
Nice bow,well done. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Re: new oak bow, from a stave not a board
« Reply #22 on: May 27, 2008, 05:51:01 pm »
thanks all,
recurve shooter- Give it a try, you dont have much to lose. i imagine it would about like any other oak. i cut a piece of chesnut oak once it was nice and red, but it twisted every which way to sunday, but it was indistinguishable form this red oak. same probably goes for the white oaks- Ryan
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: new oak bow, from a stave not a board
« Reply #23 on: May 27, 2008, 07:38:10 pm »

that is a really nice looking bow!
frank
Frank from Germany...

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: new oak bow, from a stave not a board
« Reply #24 on: May 27, 2008, 09:28:07 pm »
it's prolly just me, but it looks like near the end of the upper limb is kinda goofy lookin, like a thicker area of something. anyone els see that?
lets just shoot it

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Re: new oak bow, from a stave not a board
« Reply #25 on: May 27, 2008, 09:33:47 pm »
its not just you :)  their is a remnant of a young knot at that spot, so the back of the bow has a little hump.  look at at the belly of the bow for the tiller.  I've already been staring at that ;D - Ryan
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: new oak bow, from a stave not a board
« Reply #26 on: May 28, 2008, 01:52:02 am »
Cool little bow Ryan. My Lilacs don't get big enough. :(     Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: new oak bow, from a stave not a board
« Reply #27 on: May 29, 2008, 01:52:23 pm »
Very nice bow. I mentioned awhile back a great article about white and red oak in the current Wood magazine available from HD and Lowe's
You certainly used red oak successfully.
We'll look at this bow again this weekend.
When you're retired, every day is Saturday

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: new oak bow, from a stave not a board
« Reply #28 on: May 29, 2008, 02:55:12 pm »
Another nice bow Ryan! Wish I had time to turn one out every couple of weeks ;D. I've got a white oak I made about a year ago - deerhide backed. Seems to make a fine bow..
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: new oak bow, from a stave not a board
« Reply #29 on: May 29, 2008, 08:18:11 pm »
yup, i see the knot now. my bad, thought i had finally caught one of yall on a screw up. once again, i cant find one. :P great job man!
lets just shoot it