« previous next »
Pages: 1 [2]

Author Topic: Matt -n- Me  (Read 2403 times)

0 Members and 1 Guest are viewing this topic.

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Matt -n- Me
« Reply #15 on: March 07, 2024, 10:32:45 pm »
Muskyman I’m not by it right now. Was working in the woods today. Trying to clean up some of the dead ash trees.

You can make a pretty nice bow with an inch of Osage.

I don’t think my Simply Orange would be any wider than that. It’s a almost bend thru handle with static recurves.

Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Matt -n- Me
« Reply #16 on: March 08, 2024, 05:37:27 pm »
Very nice!  You done good with that one!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Matt -n- Me
« Reply #17 on: March 09, 2024, 05:23:12 pm »
Thanks Jerry. Glad you like it.

Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Dvshunter

  • Member
  • Posts: 1,402
Re: Matt -n- Me
« Reply #18 on: March 14, 2024, 06:01:27 pm »
Looks awesome bud!
Logged
"There is a natural mystic blowing through the air; if you listen carefully now you will hear." Robert Nesta Marley

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Matt -n- Me
« Reply #19 on: March 14, 2024, 10:50:30 pm »
Thanks Dave. Good to see you.

Muskyman I measured it at 1 1/2” at fades

Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Allyn T

  • Member
  • Posts: 1,397
  • I'm addicted to information
Re: Matt -n- Me
« Reply #20 on: March 25, 2024, 11:29:36 pm »
Looks great Brian!
Logged
In the woods I find my peace

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Matt -n- Me
« Reply #21 on: March 26, 2024, 05:44:37 am »
Great looking bow, sweet tips.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Matt -n- Me
« Reply #22 on: March 26, 2024, 12:03:20 pm »
Thank You Allyn and Del

Honestly these tips are super easy to make. I just roughly shape my overlays. Get a nice flat surface for glue line.

Glue them on and then shape my tips with a bastard file. Then just sand with Emory cloth, finer paper and steel wool.

Only thing I don’t like is I don’t think a stringer would work. So far I haven’t had to use one, but it is getting harder to brace the heavier ones with recurves.

Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise
Pages: 1 [2]
« previous next »