« previous next »
Pages: [1]

Author Topic: Spining shoot shafts  (Read 6250 times)

0 Members and 1 Guest are viewing this topic.

Offline Piddler

  • Member
  • Posts: 234
Spining shoot shafts
« on: January 08, 2024, 07:52:30 pm »
Folks, Where do you take spine readings on shoot shafts where one end is smaller than the either.
Thanks,
Piddler
Logged
"My goal in life is to try and be the kind of person my dog thinks I am"

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Spining shoot shafts
« Reply #1 on: January 09, 2024, 11:03:41 am »
Just like any other arrow shaft I place the nock end of a shoot shaft to the right on the spine tester and hang the weight in the middle of the shaft on the tester.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Piddler

  • Member
  • Posts: 234
Re: Spining shoot shafts
« Reply #2 on: January 09, 2024, 07:29:34 pm »
Forgot to mention that my spine tester is an Ace model 203 so it only measures one side.
Piddler
Logged
"My goal in life is to try and be the kind of person my dog thinks I am"

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Spining shoot shafts
« Reply #3 on: January 09, 2024, 07:53:41 pm »
Will you post a pic of the tester with an arrow on it?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Piddler

  • Member
  • Posts: 234
Re: Spining shoot shafts
« Reply #4 on: January 10, 2024, 12:59:13 pm »
Pat, Here are three photos. Photo quality is not so good. As you can see when the big end is placed in the brackets it reads about #70, Small end about #35 and in the middle about #50. I'm guessing use the middle??.
PS Pat you may recognize the cane.
Thanks
Piddler
Logged
"My goal in life is to try and be the kind of person my dog thinks I am"
Pages: [1]
« previous next »