« previous next »
Pages: [1]

Author Topic: Re working an old shoot through Hickory Molle'  (Read 4308 times)

0 Members and 1 Guest are viewing this topic.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re working an old shoot through Hickory Molle'
« on: January 03, 2024, 06:51:51 pm »
I've taken off 4mm of chrysalled belly and replaced it with heat treated Yew.
The levers are now 'T' cross section.
This vid' (latest in the series) shows how stiff the levers are and pulls it to 50# on a long string:-
https://www.youtube.com/watch?v=_WRAY4GUdaA
Hope its of some interest.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline WhistlingBadger

  • Member
  • Posts: 1,773
  • Future Expert
Re: Re working an old shoot through Hickory Molle'
« Reply #1 on: January 04, 2024, 10:38:45 am »
I've never seen one done that way before, Del.  Very interesting! 
Logged
Thomas
Lander, Wyoming
"The trail is the thing, not the end of the trail.
Travel too fast, and you miss all you are traveling for."
~Louis L'Amour

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: Re working an old shoot through Hickory Molle'
« Reply #2 on: January 21, 2024, 09:35:07 am »
Quote from: Del the cat on January 03, 2024, 06:51:51 pm
I've taken off 4mm of chrysalled belly and replaced it with heat treated Yew.
The levers are now 'T' cross section.
This vid' (latest in the series) shows how stiff the levers are and pulls it to 50# on a long string:-
https://www.youtube.com/watch?v=_WRAY4GUdaA
Hope its of some interest.
Del

I love it Del. Good simple composite design.
Logged
Well I'll say!!  Osage is king!!
Pages: [1]
« previous next »