« previous next »
Pages: [1] 2

Author Topic: Osage  (Read 1874 times)

0 Members and 1 Guest are viewing this topic.

Offline Muskyman

  • Member
  • Posts: 851
Osage
« on: October 22, 2022, 07:35:16 pm »
Do you guys think I could make a good bow with this piece of wood?
Logged

Offline Eric Garza

  • Member
  • Posts: 587
Re: Osage
« Reply #1 on: October 22, 2022, 07:59:14 pm »
Depends how long that straight section is.
Logged

Offline Muskyman

  • Member
  • Posts: 851
Re: Osage
« Reply #2 on: October 22, 2022, 08:44:52 pm »
I think the overall stave is about 8 feet. I might just cut it off about 4 foot and use it as a billet.
Logged

Offline Hamish

  • Member
  • Posts: 1,506
Re: Osage
« Reply #3 on: October 23, 2022, 03:09:15 am »
looks like 2 character english longbows, if you split it.
Logged

Offline bentstick54

  • Member
  • Posts: 756
Re: Osage
« Reply #4 on: October 23, 2022, 08:51:31 am »
How wide is it? It looks like your string could line up at both ends and still naturally run through the center of the stave. If you follow the grain with the dog leg so there is no grain run off you could possibly turn out a shooter.
Here’s one I made that shoots as good ass any that I have made and has held up well. 3rd from the left.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,544
Re: Osage
« Reply #5 on: October 23, 2022, 09:28:45 am »
Yes!  If you can't, I can.   ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Muskyman

  • Member
  • Posts: 851
Re: Osage
« Reply #6 on: October 23, 2022, 09:30:38 am »
About five inches
Logged

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Osage
« Reply #7 on: October 23, 2022, 09:35:16 am »
I see two bows in there. Not hard to straighten Osage.
Even with the character it's two good bows. I wouldn't cut it down
Logged
Freedom dies one compromise at a time. III%

Offline bentstick54

  • Member
  • Posts: 756
Re: Osage
« Reply #8 on: October 23, 2022, 10:10:12 am »
Great growth ring ratio.
Logged

Offline bentstick54

  • Member
  • Posts: 756
Re: Osage
« Reply #9 on: October 23, 2022, 10:15:21 am »
I think before I split it for two, I would remove the bark and sapwood to see what that limb looks like inside, then make a call on the best way to handle it.
Logged

Offline Muskyman

  • Member
  • Posts: 851
Re: Osage
« Reply #10 on: October 23, 2022, 11:04:17 am »
Planning on taking the bark off today. Also has some reflex in it also
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Osage
« Reply #11 on: October 23, 2022, 11:38:22 am »
« Last Edit: October 23, 2022, 11:53:29 am by BowEd »
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline TimBo

  • Member
  • Posts: 1,038
Re: Osage
« Reply #12 on: October 23, 2022, 02:00:50 pm »
Keep in mind that if you split a reflexed stave right down the middle, you may end up with two staves that will need a lot of lateral straightening... try to visualize the finished staves before splitting.  As mentioned, debarking first will probably help.
Logged

Offline Muskyman

  • Member
  • Posts: 851
Re: Osage
« Reply #13 on: October 23, 2022, 07:12:57 pm »
Didn’t get its bark off today but planning on getting it off tomorrow.
Great looking bows BowEd really like the the handle out of jute on the one. I’ll have to try that one day
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Osage
« Reply #14 on: October 24, 2022, 05:58:52 am »
In a lucky scenario on your small sapling log.One stave will have the reflex.The other the deflex.Second half split will make an outstanding natural heat treated deflex reflex bow.
Sapling bows can perform outstandingly.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed
Pages: [1] 2
« previous next »