Author Topic: Backed BL Molle 63"ntn otb - 48#@27"  (Read 2597 times)

0 Members and 1 Guest are viewing this topic.

Offline Kidder

  • Member
  • Posts: 632
Re: Backed BL Molle 63"ntn otb - 48#@27"
« Reply #15 on: May 03, 2022, 12:36:35 am »
This is really an exceptional bow. Graceful tiller, beautifully finished, but not so refined that it looks modern - this bow still shows the tree it came from. Great work!

Offline druid

  • Member
  • Posts: 475
Re: Backed BL Molle 63"ntn otb - 48#@27"
« Reply #16 on: May 03, 2022, 01:32:55 am »
I never knew to judge the tiller of Mollie’s but this looks so good. 😍

Offline GlisGlis

  • Member
  • Posts: 1,559
Re: Backed BL Molle 63"ntn otb - 48#@27"
« Reply #17 on: May 05, 2022, 03:36:15 am »
Beautiful. I really like it. It's elegant in its simplicity but it shows all the work and design choices you put in it  :OK

Offline backtowood B2W

  • Member
  • Posts: 574
Re: Backed BL Molle 63"ntn otb - 48#@27"
« Reply #18 on: May 05, 2022, 02:20:25 pm »
Thank you for the nice words!!!I really love this bow - it just shots so simple... so glad you like her too.
This is really an exceptional bow. Graceful tiller, beautifully finished, but not so refined that it looks modern - this bow still shows the tree it came from. Great work!
It is finished with 180 grit sandpaper than one coat with resin wax turpentine mix, than a good rub with steelwool except rawhide , than some layers with tung oil and least another rub with steelwool to cut the shine.
I never knew to judge the tiller of Mollie’s but this looks so good. 😍
Me either! I fact the levers aren't that dramatic as it could be done - but hard enough for me. Sometimes during tillering, I didn't know where to get more bend, mostly then I just worked at the fades or on the trapezoid's cross-section.