Author Topic: Møllegabet Elm - 50#@27" 65"ntn  (Read 1893 times)

0 Members and 1 Guest are viewing this topic.

Offline Rowan Bows

  • member
  • Member
  • Posts: 115
Møllegabet Elm - 50#@27" 65"ntn
« on: March 14, 2022, 02:41:29 pm »
Hey Guys,
I decided to deinstall the penobscot cause how ever I tried to gain draw weight the speed wasnt astonishing. Maybe its the penobscot molle desgn or even the double bow principle itself. However I gave that Elm an intense Heat Treat, new horn tips, really thin levers and a little sanding. also 2 new smaller bandages.
The result was 50#@27 and 176fps with a 480gn arrow.

Another ting that confuses me is my chrony. It showed 3 or for times around 60Mps thats like 195fps. I doubt that numbers but could it be possible? the chrony was always straight and full opened. IDK I think it shows reall weird numbers sometimes so what could that cause?
Thanks for commenting.

As always a little funny clip of my work and detailed pictures:

https://www.youtube.com/watch?v=SS10OQu_L7c

https://imgur.com/gallery/QUjMnU6



Offline Rowan Bows

  • member
  • Member
  • Posts: 115
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #1 on: March 14, 2022, 02:44:04 pm »
some more

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #2 on: March 14, 2022, 02:54:05 pm »
Cool...Does it shoot faster now than as a penobscot bow?Decent speed for that bow.I usually use a 10 grain arrow to compare bows to each other.
You have to know your chronograph.A 19 fps jump at the same draw is'nt right.A 460 grain arrow @ 50#'s might get you to 195fps.
With mine when I get consistently or close to same speed shots I know it's right.
« Last Edit: March 15, 2022, 10:26:26 pm by BowEd »
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Rowan Bows

  • member
  • Member
  • Posts: 115
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #3 on: March 14, 2022, 03:23:57 pm »
no same arrow every shot 480gn and yes its much faster than it was a penobscot - when it was a 68# penobscot it shot like 176fps with that arrow. now 50lbs and same speed but one soft and one intense heat treating. so my conclusion is - the penobscot concept it not worth it, at least in this form with a Molle and a small bow attached.
Maybe a recurve mainbow can go faster but... I dont think very much
« Last Edit: March 14, 2022, 03:26:58 pm by Rowan Bows »

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #4 on: March 14, 2022, 04:10:31 pm »
Cool about the transformation of your bow.I think those penobscot type bows were demographically advantageous for the type of wood they had in their area.They still got the job done and have their place in archery.
I had my chronograph flash a 210 fps reading before.I disregarded that number.An abrupt jump like that is'nt right.A glitch I call it.Can't really tell you why it does it either.Maybe the arrow goes through a different part of the shooting lane or the arrow paradoxes more I could'nt tell you.
I see your tiller is eliptical mostly or holmgaardish.Mine are too when their is more working limb length than lever.
Very nice bow.
« Last Edit: March 15, 2022, 01:33:31 am by BowEd »
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline superdav95

  • Member
  • Posts: 2,067
  • 3432614095
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #5 on: March 15, 2022, 12:41:41 am »
Rowan. 

I had issues with my orig chrono and replace it as it was doing the same thing you are seeing with some inconsistency in readings.  My orig one was a Caldwell.  I hated it.  It seemed temperamental too.  I switched to pro chrono brand and now I’m good.  Not all chronos are equal.  What brand are you using

Btw I love your bow.  I love the molle design. 

Cheers
Sticks and stones and other poky stabby things.

superdav95@gmail.com

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #6 on: March 15, 2022, 01:13:50 am »
I have a pro chrono brand chronograph also.
« Last Edit: March 15, 2022, 02:12:06 am by BowEd »
BowEd
You got to stand for something or you'll fall for anything.
Ed

bownarra

  • Guest
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #7 on: March 15, 2022, 03:44:17 am »
Cool about the transformation of your bow.I think those penobscot type bows were demographically advantageous for the type of wood they had in their area.They still got the job done and have their place in archery.
I had my chronograph flash a 210 fps reading before.I disregarded that number.An abrupt jump like that is'nt right.A glitch I call it.Can't really tell you why it does it either.Maybe the arrow goes through a different part of the shooting lane or the arrow paradoxes more I could'nt tell you.
I see your tiller is eliptical mostly or holmgaardish.Mine are too when their is more working limb length than lever.
Very nice bow.


Penobscot bows were 'invented' by a white fella who turned indian...the weird bows were part of his 'show'. Think about it...why would a tribesman make two bows when one is better....much better!

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #8 on: March 15, 2022, 03:54:15 am »
Ahhh yes the old Wabanaki bow.It can be said it is a version of the cable backed bow too.
According to research the Mi'kmaq people of the southeastern woodlands of Canada used these bows invented by them long before Chief Big Thunder alias Frank Loring showed it in his circus.
« Last Edit: March 15, 2022, 04:19:43 am by BowEd »
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Rowan Bows

  • member
  • Member
  • Posts: 115
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #9 on: March 15, 2022, 07:32:03 am »
the brand is "chrony" It also has defusers for sunny days but mostly it counts better without them. I made a lots of shots at the end of the video before the outro
« Last Edit: March 15, 2022, 07:38:00 am by Rowan Bows »

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #10 on: March 15, 2022, 08:38:27 am »
Looks like you got some room to shoot distance in your pictures.
It's another way of testing performance.
« Last Edit: March 15, 2022, 09:14:55 am by BowEd »
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Rowan Bows

  • member
  • Member
  • Posts: 115
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #11 on: March 15, 2022, 10:18:52 am »
yes its no problem here

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #12 on: March 15, 2022, 11:16:20 pm »
I watched your video.Especially the end of it shooting through the chrono.I saw a lot of 52 to 54 meters per second shots mostly which translates to lower to mid 170's fps.A bow that should shoot at least 200 yards or more with a 10 grain arrow.
Any bow that'll shoot that distance is an outstanding bow.
I just tested a bow here a while ago.Stating everything that's needed to know.Draw weight/draw length/grain weight of arrow using same arrow/and string weight.I had a person spot for me too while shooting to be sure my draw length was consistent.The range of speeds while shooting varied around 3 fps over 5 shots.
I'm totally confident of my findings here doing things this way then.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline simk

  • Member
  • Posts: 1,159
Re: Møllegabet Elm - 50#@27" 65"ntn
« Reply #13 on: March 16, 2022, 04:39:29 am »
good tuning move - I like it better now.
thanx for the convlusive experiment, so I can skip this one for me  ;D
cheers
« Last Edit: March 16, 2022, 05:33:24 am by simk »
--- the queen rules ----