Main Discussion Area > Horn Bows
Horn bow???
superdav95:
Couple more pics
BowEd:
Very nice fading of colors and overall look on your bow.That's hard to do correctly.
superdav95:
Thankyou sir! And thanks again for the horn.
star2067:
What is the thickness of the limb at the end ? I am trying to reproduce that model. But and hint about the thickness would help me alot!
Beautiful bows!
superdav95:
--- Quote from: star2067 on March 27, 2022, 11:59:36 am ---What is the thickness of the limb at the end ? I am trying to reproduce that model. But and hint about the thickness would help me alot!
Beautiful bows!
--- End quote ---
Thankyou. It was a fun build. Sorry for the delay. I just saw this.
The measurements of the limbs as best as I can give.
Tip thickness. Prior to glue up was approx .300
After glue up of horn and final tillering by scraping horn belly. Approx .400
Width at widest point at base of limb is 1.7 which tapers slightly out to 3/4 way up the limb to about 1.6. Then to the base of the syahs is 1/2 wide.
Thickness at base of the limbs near handle including the horn lam approx .520.
Hope this helps out. Any other questions just ask or send me a pm.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version