« previous next »
Pages: [1]

Author Topic: Short bow  (Read 1141 times)

0 Members and 1 Guest are viewing this topic.

Offline Mad Max

  • Member
  • Posts: 480
Short bow
« on: December 29, 2021, 03:28:58 pm »
I want to make a 42" NTN short brush bow Osage Bendy handle.



How wide and what draw length should I make it?
Should I make the grip narrower?
Logged
I would rather fail trying to do something above my means, Than to succeed at something beneath my means.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Short bow
« Reply #1 on: December 29, 2021, 04:11:35 pm »
Mark, you could get 20" draw with good tiller. I'd go 1 1/4" to 1 1/2" and if you narrow the handle leave it thicker then bring the bend back in to the handle at full draw. Also, flip the tips a bit.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mad Max

  • Member
  • Posts: 480
Re: Short bow
« Reply #2 on: December 29, 2021, 05:30:40 pm »
 :OK
Logged
I would rather fail trying to do something above my means, Than to succeed at something beneath my means.
Pages: [1]
« previous next »