Main Discussion Area > HowTo's and Build-a-longs

DIY Hunter’s Pack Seat

(1/2) > >>

Don W:
details of the build https://www.diy.timetestedtools.net/diy-hunters-pack-seat/

There are a few pack seats on the market, but they’re very pricey, and although I didn’t buy any of them, I had concerns about each one. I tried to avoid those concerns in my design, however, my design required it meet my ability to built it both in skill set and equipment needed.

It took a couple of iterations to get to the final design. That may be clear in some of the esthetics.

Russ:
Very very nice! i might make it! it doesnt seem too difficult.... but we'll see.

Don W:

--- Quote from: Deerhunter21 on November 01, 2021, 12:58:34 pm ---Very very nice! i might make it! it doesnt seem too difficult.... but we'll see.

--- End quote ---

It's pretty easy. First iteration only took about an hour. It took a little tweaking but not much.

GlisGlis:
I like it alot
my only concern is that where the front leg is attached to the flat the flat is engraved and this could be a weak point

AndrewS:
I will test it. May be it is a frame for a survival back pack (the luxus version) ???

Navigation

[0] Message Index

[#] Next page