« previous next »
Pages: [1]

Author Topic: tanned a coon!  (Read 2685 times)

0 Members and 1 Guest are viewing this topic.

Offline Fox

  • Member
  • Posts: 995
tanned a coon!
« on: November 16, 2021, 01:46:34 pm »
We finished tanning a coon the other day and it worked out great. salted, fleshed/membraned, washed, dried oiled overnight and stretched dry. It is super soft it looks awesome. There is one spot that had a tiny bit of grain splitting and I have no clue what caused it again. It was really well fleshed so I don't think it was caused by fat, but im not sure. Any ideas?

by Livvydog, on FlickrUntitled by Livvydog, on FlickrUntitled by Livvydog, on Flickr
Logged
Why must we make simple things so complicated?

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: tanned a coon!
« Reply #1 on: November 17, 2021, 05:28:31 am »
Cool.....As far as the bare spot goes the grain is awful thin in those flank areas.Over pressure from the fleshing knife on the beam can cause that too.Most times those areas are'nt even in a pattern from something you want to make from it.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Fox

  • Member
  • Posts: 995
Re: tanned a coon!
« Reply #2 on: November 17, 2021, 11:57:10 am »
Thanks so much Ed! That makes me feel better  :)
Logged
Why must we make simple things so complicated?

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: tanned a coon!
« Reply #3 on: November 17, 2021, 03:59:35 pm »
Something like that can happen from the best of tanneries out there too.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Stoker

  • Member
  • Posts: 1,727
Re: tanned a coon!
« Reply #4 on: November 18, 2021, 10:13:24 am »
It still turned out pretty nice. Great for a lot of projects.
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano
Pages: [1]
« previous next »