« previous next »
Pages: [1]

Author Topic: Doug fir arrows????  (Read 2251 times)

0 Members and 1 Guest are viewing this topic.

Offline Jakesnyder

  • Member
  • Posts: 458
Doug fir arrows????
« on: October 15, 2021, 03:33:30 pm »
I have never tried any Douglas fir for arrows. Would it be any good to carve bulbous nocks into them?? How dence are they? And I'm talking about the ones from Carson brown.. thanks!
Logged

Offline WhistlingBadger

  • Member
  • Posts: 1,728
  • Future Expert
Re: Doug fir arrows????
« Reply #1 on: October 15, 2021, 06:15:55 pm »
I've used doug fir shafts and I like them.  IME they're a little tougher than POC, similar weight.  Good all-around arrow.  Don't know about bulbous nocks.  I cut self-nocks into mine and wrapped with silk thread to keep them from splitting.
Logged
Thomas
Lander, Wyoming
"The trail is the thing, not the end of the trail.
Travel too fast, and you miss all you are traveling for."
~Louis L'Amour

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Doug fir arrows????
« Reply #2 on: October 15, 2021, 07:27:10 pm »
They should work ok with bulbous nock if the neck isn't too thin. I've never made bulbous nocks so take what I said with a grain of salt.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Doug fir arrows????
« Reply #3 on: October 17, 2021, 03:08:17 am »
I’m with Thomas and Pat, you might also cut in an insert.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry
Pages: [1]
« previous next »