« previous next »
Pages: [1]

Author Topic: Started on some knives  (Read 6182 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
Started on some knives
« on: July 26, 2021, 02:57:09 pm »
It's been a while since I've done any knife work.  I roughed out a few blades from some 1095 billets today.  I'm going with a slight recurve blade shape.  Something new for me. 





Logged
I started out with nothin' and I still got most of it left

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: Started on some knives
« Reply #1 on: July 26, 2021, 04:45:15 pm »
  Looking good Clint...I've always been able to achieve the sharpest edge on 1095
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Started on some knives
« Reply #2 on: July 26, 2021, 08:13:48 pm »
Those are looking good Clint.
Logged

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Started on some knives
« Reply #3 on: July 30, 2021, 05:35:37 pm »
I wanna see where this goes! it looks really good so far!  ;D
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Digital Caveman

  • Member
  • Posts: 1,117
  • formerly Tradcraftsman, formerly Yooper Bowyer
Re: Started on some knives
« Reply #4 on: July 30, 2021, 09:00:47 pm »
There's Russell, thought he went and grew up. :D

Good to know about the metal types.  I just ran into a blacksmith today who pretty much echoed you.  He likes 1085-1095 best for knives.
Logged
God Bless America

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Started on some knives
« Reply #5 on: July 30, 2021, 10:16:41 pm »
I started grinding the bevels in the small blade.



 
It was going good until the drive pulley on the sander started to crumble apart.  It's the second pulley that has fell apart.  It's a pretty old sander that I picked up a couple weeks ago for $20




Luckily I had an old motor on a shelf that had a similar sized pulley.  I had to move the motor and remove some guides to make it work.




I was able to finish roughing in the bevels on one knife.







Logged
I started out with nothin' and I still got most of it left

Offline KHalverson

  • Member
  • Posts: 758
Re: Started on some knives
« Reply #6 on: July 31, 2021, 07:42:21 am »
beautiful grinds.
could you please show us your jig?
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Started on some knives
« Reply #7 on: July 31, 2021, 07:51:05 am »
It's just a piece of aluminum angle that I clamp the blade to.  You can see it in the first picture.  I tilted the tool rest.  I took a guess at the angle and was pretty happy with the results.  The billets are a little thick.  That angle removed a lot of weight.  I use a small guide for the plunge grind. 
Logged
I started out with nothin' and I still got most of it left

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: Started on some knives
« Reply #8 on: July 31, 2021, 09:37:39 am »
  Good progress Clint...
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Started on some knives
« Reply #9 on: July 31, 2021, 01:46:52 pm »
Looking good, Clint.   :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline White Falcon

  • Member
  • Posts: 270
Re: Started on some knives
« Reply #10 on: August 27, 2021, 09:35:43 am »
Clint, very nice grind. Can you post some better pics of the jig at differant angles.
Logged
Pages: [1]
« previous next »