« previous next »
Pages: [1]

Author Topic: Sugar maple stave question...  (Read 1094 times)

0 Members and 1 Guest are viewing this topic.

Offline Jakesnyder

  • Member
  • Posts: 458
Sugar maple stave question...
« on: June 22, 2021, 11:34:06 am »
So this stave had the bark removed when it would peel right off. It has these 2 little gouges in it. It's hard to explain but it is how the tree grew not man made cuts. They are too deep to stand out. Should I try chasing a ring or will they be just fine? The biggest one is maybe 1/8in long and maybe a little less than that deep.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Sugar maple stave question...
« Reply #1 on: June 22, 2021, 01:02:33 pm »
If they are natural they should be OK. If it would make it feel better just fill them with super glue.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Online Eric Krewson

  • Member
  • Posts: 5,412
Re: Sugar maple stave question...
« Reply #2 on: June 22, 2021, 02:08:29 pm »
Those are natural inclusions, they shouldn't be a problem,
Logged

bownarra

  • Guest
Re: Sugar maple stave question...
« Reply #3 on: June 22, 2021, 02:23:05 pm »
No problem. :)
Logged

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Sugar maple stave question...
« Reply #4 on: June 22, 2021, 03:11:18 pm »
I built a half dozen Sugar Maple bows a few years back. Some had those little holes. I did as Pat suggested and filled with super glue. No problems at all.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline dylanholderman

  • Member
  • Posts: 787
Re: Sugar maple stave question...
« Reply #5 on: June 22, 2021, 09:07:01 pm »
i started on sugar maple and would just ignore them
Logged
Pages: [1]
« previous next »