« previous next »
Pages: [1]

Author Topic: Educate me guys  (Read 3220 times)

0 Members and 1 Guest are viewing this topic.

Offline Mafort

  • Member
  • Posts: 424
Educate me guys
« on: June 03, 2021, 06:08:05 pm »
So I had a question that I was pondering figured I’d share it here. I have a limb of an Osage tree that’s grown curved. when split the inside of this curve becomes the back of the bow essentially making a bow with several inches of reflex. How much of this reflex can I assume the finished bow would maintain? Also what is the stress factor in that? It’s pretty short but I figure I can sinew back it and then make a shorter draw bow.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Educate me guys
« Reply #1 on: June 03, 2021, 06:43:31 pm »
IMO, more than about 4" of reflex can cause enough strain to eliminate any advantage you may get from the reflex. I usually add 3" to 4" and end up with 1" of reflex or a flat profile.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Educate me guys
« Reply #2 on: June 03, 2021, 08:12:44 pm »
My experience, won’t pull out as readily as induced reflex, but more temperamental.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

bownarra

  • Guest
Re: Educate me guys
« Reply #3 on: June 04, 2021, 02:40:58 am »
How long is a piece of string...................? :)
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Educate me guys
« Reply #4 on: June 04, 2021, 02:53:36 am »
Quote from: bownarra on June 04, 2021, 02:40:58 am
How long is a piece of string...................? :)
I generally find it is just too short for the intended purpose ::)
Del
Logged
Health warning, these posts may contain traces of nut.

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Educate me guys
« Reply #5 on: June 04, 2021, 05:12:15 am »
Biggest issue is that that wood is compression or tension wood and will change its shape as humidity levels change, branch wood is unstable and doesn't keep its profile
Logged

Offline bassman211

  • Member
  • Posts: 597
Re: Educate me guys
« Reply #6 on: June 04, 2021, 06:43:46 pm »
What pat B said.
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Educate me guys
« Reply #7 on: June 04, 2021, 11:48:33 pm »
and that will vary with how much sinew is applied,,, its pretty hard to guess,
Logged
Pages: [1]
« previous next »