« previous next »
Pages: [1]

Author Topic: Another question  (Read 2093 times)

0 Members and 1 Guest are viewing this topic.

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Another question
« on: May 16, 2021, 07:20:53 pm »
Sorry for the silly question. I just forgot the equation for what draw length fits what bow. Thanks

Can a 62” bow be drawn to 26”?
« Last Edit: May 16, 2021, 08:03:10 pm by Deerhunter21 »
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Can a 62” bow be drawn to 26”?
« Reply #1 on: May 16, 2021, 07:23:19 pm »
I just have to cut a stave I’m working on down because of this
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Can a 62” bow be drawn to 26”?
« Reply #2 on: May 16, 2021, 07:28:29 pm »
Haha Nevermind I just saw the thread made a little bit ago about bow length vs draw length....
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: Can a 62” bow be drawn to 26”?
« Reply #3 on: May 16, 2021, 07:41:49 pm »
Sure 62 is plenty, some do it different but I try to double draw length and add no moving parts like fads and handle for a ridged handle now, less for bend in the handle bow, this is really safe and that’s what I want. Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: Can a 62” bow be drawn to 26”?
« Reply #4 on: May 16, 2021, 07:43:21 pm »
O ya  (-P 😉Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Can a 62” bow be drawn to 26”?
« Reply #5 on: May 16, 2021, 07:44:14 pm »
Draw out your bow and see where the checks fall on the tip. Checks are not necessarily deadly. even if it falls within the tip a sinew wrap may be all you'll need if even that.
 A 62" bow is long enough for a 26" draw.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: another question
« Reply #6 on: May 16, 2021, 07:55:17 pm »
I drew the bow out pat, the problem is that the checks weren’t running along the back of the bow, they were running along the side. I cut the bow down to 62” and the checks/premature delams  ( :) ) were gone... now I got another problem....

What do I do with that rotten hole in the side? Its really close to the fades... I scraped out a lot of the dead wood... can I fill it with CA glue and sawdust??? Do I try to carve it out?

I havnt roughed out the bow on the other side
« Last Edit: May 16, 2021, 08:02:21 pm by Deerhunter21 »
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Digital Caveman

  • Member
  • Posts: 1,117
  • formerly Tradcraftsman, formerly Yooper Bowyer
Re: Another question
« Reply #7 on: May 16, 2021, 09:28:41 pm »
Where did you find that hunk of wood? looks weathered to me.
Logged
God Bless America

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Another question
« Reply #8 on: May 16, 2021, 09:34:03 pm »
I got it through a trade here. It’s a nice persimmon stave, I just don’t know what to do about this... to carve around it and make a hump on the other side would violate the grain, but to leave it would cause a pretty serious weak point.
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Another question
« Reply #9 on: May 16, 2021, 10:56:52 pm »
How deep does the knot go?  Don't carve out the knot. How thick is it above the knot? Can you move the bow over towards the other side of the stave to get away from the knot? 

Tradecraftsman, this is a persimmon stave I sent to Russell. It's been in my basement since it was sent to me a few years ago. It's a sound piece of now wood.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Another question
« Reply #10 on: May 17, 2021, 02:08:17 am »
Listen to Pat!  I would scrape the hole as clean as possible, then fill with ca or epoxy and sawdust paste.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Digital Caveman

  • Member
  • Posts: 1,117
  • formerly Tradcraftsman, formerly Yooper Bowyer
Re: Another question
« Reply #11 on: May 18, 2021, 07:23:53 pm »
I see, never mind then.  Good luck  :D
Logged
God Bless America

gutpile

  • Guest
Re: Another question
« Reply #12 on: May 20, 2021, 01:39:08 pm »
I rarely build a bow over 60"... my draw is 26.5..gut
Logged
Pages: [1]
« previous next »