« previous next »
Pages: [1]

Author Topic: Fuming- Ammonia hydroxide or chloride?  (Read 1108 times)

0 Members and 1 Guest are viewing this topic.

Offline redhillwoods

  • Member
  • Posts: 123
Fuming- Ammonia hydroxide or chloride?
« on: May 12, 2021, 11:53:40 am »
I'll be fuming some White Oak. Never done it before. l see that there are two types of ammonia: hydroxide and chloride. Which one is best and are there any other specs l need to know? Thanks everyone
Dave
Logged

Offline Kidder

  • Member
  • Posts: 637
Re: Fuming- Ammonia hydroxide or chloride?
« Reply #1 on: May 12, 2021, 04:20:22 pm »
Check out Simsons website - Stonehill primitive bows. He has a page in the “how to’s” with info on fuming. Sorry I can’t be of more help as I’ve never done it (but love the results). Good luck!
Logged

Offline Hamish

  • Member
  • Posts: 1,557
Re: Fuming- Ammonia hydroxide or chloride?
« Reply #2 on: May 14, 2021, 09:21:30 pm »
Never tried it. I always thought it was common household cleaning ammonia, left undiluted in an open container. NH3. Make a little closed off enclosure with plastic to trap the fumes.
Logged

Offline PaSteve

  • Member
  • Posts: 816
Re: Fuming- Ammonia hydroxide or chloride?
« Reply #3 on: May 15, 2021, 09:22:04 am »
For best results you should use Industrial or Janitorial strength ammonia hydroxide. Common household will work but not nearly as good. It's usually only 2 - 3 %. I have used 10% janitorial strength from Ace Hardware store with excellent results.
Logged
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges
Pages: [1]
« previous next »