Hi all, hope you enjoy the read and pics:
This is a bow for an old friend who gave me a piece of apple that was pretty darn straight and only slightly twisted. The man is not only an archer but also a 'pomologist'... A what?! Someone who compares apples with apples and can tell the actual differences. Hence his nickname ''Mr. Apple.'' Needless to say he had a wish for a bow out of apple wood so we made a deal. he would trade me a few osage staves for a bow out of apple wood. So here it is.
I kinda freestyled the profile on this one. I drew a straight line on the back and started cutting with an axe, adjusting as I went along.
There were a few knots and cracks that I filled with superglue and also bound one particular knot that I didn't trust.
Apple is supposed to be premium bow wood, but to be honest it felt a bit soggy to me. The wood is definitely dry though. I didn't dare to heat treat it, but next time I definitely will. I think it will improve performance a lot.
In hindsight I think the tiller should be a bit more elliptical, especially on the lower limb. I didn't dare to put too much strain on that kink in the lower limb, but I think it could've taken a bit more. Oh well, it's a fine shooter and I've got to say: Apple is a gorgeous wood! Especially with that osage stain on the back it's a looker if you ask me.
And some stats:
- NTN length: 68''
- Draw weight: 46lbs
- Draw length: 29'' from the belly of the grip (about 29,5'' from the back)
- String(s): 10 strand Spectra 652
- Max width: 47mm
- Stain: Osage/ammonia
- Finish: Tung oil
- Arrows: 11/32 cedar shafts, barreled to 5/16 front and 1/4 back. 100gn points, 4'' feathers.
Thanks for checking it out,
Jaap