« previous next »
Pages: [1]

Author Topic: Finish over ERC  (Read 1010 times)

0 Members and 1 Guest are viewing this topic.

Offline Kidder

  • Member
  • Posts: 635
Finish over ERC
« on: April 12, 2021, 01:52:17 am »
Can anyone point me to a finish (if their is one) that will maintain the light purple on ERC rather than change it to a dark red? I’ve only used minwax tung oil, which really pops the grain, but also really darkens the heartwood. Thanks!
Logged

Offline Digital Caveman

  • Member
  • Posts: 1,117
  • formerly Tradcraftsman, formerly Yooper Bowyer
Re: Finish over ERC
« Reply #1 on: April 12, 2021, 08:44:53 am »
I know that wood is very sensitive to UV, so I would use something like helmsman spar urethane, but that dose change the color some.
Logged
God Bless America

gutpile

  • Guest
Re: Finish over ERC
« Reply #2 on: April 12, 2021, 10:01:16 am »
anything you use is going to alter the color.. spar will yellow the sapwood too.. gut
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Finish over ERC
« Reply #3 on: April 12, 2021, 12:54:14 pm »
It's gonna darken no matter what.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline stuckinthemud

  • Member
  • Posts: 2,348
    • avenue woodcarving
Re: Finish over ERC
« Reply #4 on: April 12, 2021, 01:45:47 pm »
Nothing you can do to stop the wood oxidising.
Logged
Pages: [1]
« previous next »