Author Topic: Ocean spray bendy handle bow 48" ntn 24" draw length tiller check  (Read 1440 times)

0 Members and 1 Guest are viewing this topic.

Offline Dante_F

  • Member
  • Posts: 179
Ive just gotten back into the whole bow-making hobby and decided to make some shavings. This was a 48.5 inch peice of oceanspray that I've had seasoning for around two years now, with about an inch of natural deflex. I'm gripping the bow just below center so the arrow pass is the dead center lengthwise. Anyways any thoughts or critique on the tiller?

https://imgur.com/a/XS2vmVd

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Ocean spray bendy handle bow 48" ntn 24" draw length tiller check
« Reply #1 on: March 30, 2021, 10:03:10 am »
The picture may be distorting but I see the bow bending way too much below your hand and not near enough on the top limb.

A tillering gizmo might be what you need to even things out.

http://www.primitivearcher.com/smf/index.php/topic,61422.0.html
« Last Edit: March 31, 2021, 05:07:18 pm by Eric Krewson »

Offline bambule

  • Member
  • Posts: 213
Re: Ocean spray bendy handle bow 48" ntn 24" draw length tiller check
« Reply #2 on: March 31, 2021, 10:10:25 am »
I agree with Eric.

Greetz
Cord
Niedersachsen, Germany