« previous next »
Pages: [1]

Author Topic: I got a boomerang for a stave.  (Read 1463 times)

0 Members and 1 Guest are viewing this topic.

Offline Boofus

  • Member
  • Posts: 55
I got a boomerang for a stave.
« on: February 21, 2021, 12:50:26 am »
I have a piece of yew that I wanted to make into a longbow. But this thing is a boomerang! Can yew withstand lateral straightening with steam?
« Last Edit: February 23, 2021, 12:15:11 am by Boofus »
Logged

bownarra

  • Guest
Re: I got a boomerang for a stave.
« Reply #1 on: February 21, 2021, 02:23:57 am »
Yes yew will bend like butter :) Just make sure its hot enough with the heat well soaked in.
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: I got a boomerang for a stave.
« Reply #2 on: February 21, 2021, 02:02:30 pm »
I think you also would want to clamp solid to cure or straighten gradually, but I am not really experienced at steaming.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline elijahjmhutchinson

  • Member
  • Posts: 25
  • Caveman Technician
Re: I got a boomerang for a stave.
« Reply #3 on: March 13, 2021, 12:19:01 am »
No sweat bro. Just get the wood worked down to a reasonable amount and steam bend it. If you want to be super fancy about it, some dudes cut a "c" shape along the length of a 2X4 and clamp it.
Logged
Elijah JM Hutchinson

Offline Hamish

  • Member
  • Posts: 1,549
Re: I got a boomerang for a stave.
« Reply #4 on: March 13, 2021, 05:46:40 pm »
yewmerang.
Logged
Pages: [1]
« previous next »