Walnut?

[Deerhunter21]

Is walnut a good bow wood for a board bow?

[Mo_coon-catcher]

I don’t know about from a board. But it works great from a stave. It’s best to fully have a ring chased, but I found that the sapwood can take some ring violation without issue, I havnt tried it with heartwood  at this point. It’s a very low density but snappy wood. Especially when heat treated.

Kyle

[RyanY]

If you find a good piece go for it. No reason not to. Just keep it wide or long or both.

[Digital Caveman]

Make sure there is not any grain run out on the belly, even if you back it, this can cause frets.

[Fox]

It’s pretty good as a stave wood, never tried a board bow through. Like coon catcher said it’s great when heat treated, super light and snappy

[Hawkdancer]

Nuts is good!  What the other folks said!
Hawkdancer