« previous next »
Pages: [1]

Author Topic: First Knife  (Read 6409 times)

0 Members and 1 Guest are viewing this topic.

Offline mmattockx

  • Member
  • Posts: 984
First Knife
« on: February 08, 2021, 01:27:38 pm »
Since it's been too cold to work on bows I decided to finally start my first real knife (I have made decorative ones from junk steel in the past). It's stock removal, so not really at the forge yet, but it will be heat treated using a 2 brick forge.

O1 steel, 1/8" thick, 7.5" long with a 3.25" blade. Just have the shape finished for the moment, waiting for it to warm up enough to grind the bevels without gloves on.






Mark
Logged

Offline TRiggs

  • Member
  • Posts: 59
Re: First Knife
« Reply #1 on: February 08, 2021, 02:28:19 pm »
Thats a very nice shape and size it will make a  great EDC knife
Logged
American Blade Smith Apprentice

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: First Knife
« Reply #2 on: February 08, 2021, 07:56:07 pm »
Looks nice
Logged

Offline Stoker

  • Member
  • Posts: 1,729
Re: First Knife
« Reply #3 on: February 13, 2021, 06:03:21 pm »
Great start
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: First Knife
« Reply #4 on: February 14, 2021, 02:39:57 pm »
Looks like a good start! Keep it goin!
Logged
Clatskanie, Oregon

Offline mmattockx

  • Member
  • Posts: 984
Re: First Knife
« Reply #5 on: February 14, 2021, 03:01:48 pm »
Quote from: Bryce on February 14, 2021, 02:39:57 pm
Looks like a good start! Keep it goin!

Thanks to all for the comments. I have been stuck for over a week with a brutal cold snap, but that is letting up this week and I will be able to get back on this in the next few days. I sure get grumpy when I am stuck inside watching it snow and can't do anything...


Mark
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,207
  • if you have to ask you wouldn't understand ,Tenn.
Re: First Knife
« Reply #6 on: February 15, 2021, 09:56:46 am »
Looking good, love the size. Look forward to seeing it all finished up. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: First Knife
« Reply #7 on: February 15, 2021, 01:52:39 pm »
Nice start!  Looking forward to seeing the finished knife.  It is a bit of a cold spell, -26F with a -45F wind chill overnight, high temps have been below zero for most of the week.  Supposed to break above zero today, and it has been worse north of here!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry
Pages: [1]
« previous next »