« previous next »
Pages: 1 [2]

Author Topic: backed wrong side!!  (Read 2553 times)

0 Members and 1 Guest are viewing this topic.

Offline HH~

  • Member
  • Posts: 1,742
Re: backed wrong side!!
« Reply #15 on: January 10, 2021, 02:20:48 pm »
I like to say.... aint nuthin you cant fix with a torch and an angle grinder.

HH~
Logged
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline Selfbowman

  • Member
  • Posts: 3,119
Re: backed wrong side!!
« Reply #16 on: January 10, 2021, 03:03:28 pm »
😁😁😂😁fix  or send to the scrap yard?
Logged
Well I'll say!!  Osage is king!!

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: backed wrong side!!
« Reply #17 on: January 10, 2021, 03:28:34 pm »
Ya don't feel bad, I have made some pretty big boo boos myself, ??? if fact more time than I care to mention, once cut the nocks in backwards, or maybe twice. :-\ You can probably sand it off or maybe a scrapper. :) Heck you could leave it on and back the other side also. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline scp

  • Member
  • Posts: 660
Re: backed wrong side!!
« Reply #18 on: January 11, 2021, 01:49:26 pm »
They say "Gorilla Wood Glue is very heat resistant. Once cured, it is safe to heat up to 150°F." That is much lower than my normal heat treating temperature of 150°C (302°F) for 30 minutes. But we need to be careful with fumes or smoke.
Logged

Offline Flntknp17

  • Member
  • Posts: 148
Re: backed wrong side!!
« Reply #19 on: January 12, 2021, 07:20:23 am »
I haven't backed the wrong side......yet, but I have twice cut the nock grooves angled the wrong way by mixing up the belly and the back while the bow was in the vice.... (lol)
Logged

gutpile

  • Guest
Re: backed wrong side!!
« Reply #20 on: January 12, 2021, 08:04:45 am »
not sure how that happens ,but yes a heat gun will break down gorilla glue . I have used heat to break down gorilla glue before... works like a charm.... gut
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: backed wrong side!!
« Reply #21 on: January 12, 2021, 08:59:05 am »
Don't feel badly.

I strung a board bow backwards. It was a piece of red oak I inherited. It was a bow for my Kumbaro's (:)) son. I've cut nocks backwards. I forgot to compensate for knot on an osage stave and broke it. I've probably done lots of other things.

Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: 1 [2]
« previous next »