Author Topic: Surewood shafts (Douglas Fir)  (Read 2477 times)

0 Members and 1 Guest are viewing this topic.

Black Moshannon

  • Guest
Surewood shafts (Douglas Fir)
« on: November 20, 2020, 12:22:21 pm »
I’m going to be using them to make a batch of field point arrows. Mine will be 11/32 spined 55-60 pounds. What’s the highest weight I can expect just the shaft to be? Hoping for high weight to match my shoot arrows
« Last Edit: November 20, 2020, 12:35:45 pm by Kenneth »

Offline Mesophilic

  • Member
  • Posts: 876
Re: Surewood shafts (Douglas Fir)
« Reply #1 on: November 23, 2020, 09:03:18 am »
I use alot of Surewood shafts and find in the 50-55 pound spine range each shaft tends to weigh 350 to 400 grains.  So cut to 30" wifh a 125 grain glue on point my finished shafts tend to be in the weight range of 475 to 525 grains.  Each batch is slightly different so your results may vary a little bit.
Trying is the first step to failure
-Homer Simpson-

Black Moshannon

  • Guest
Re: Surewood shafts (Douglas Fir)
« Reply #2 on: November 25, 2020, 12:39:45 pm »
Ok I found out I can get them in that spine range from 450-460 grain weight. That is good, will be adding 160 grain field tips so hoping I can end up with around 650 grain total weight arrows which is closer to the weight of my wild rose arrows.