Author Topic: Trapping a Yew self bow?  (Read 1268 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Trapping a Yew self bow?
« on: November 08, 2020, 04:23:49 pm »
How much could I get away with or is it even wise? it's a nice piece of yew but from a 3-4" trunk. The sapwood comes down the sides in spots and I thought if I trapped it I could expose a little more heartwood.

Offline dylanholderman

  • Member
  • Posts: 787
Re: Trapping a Yew self bow?
« Reply #1 on: November 09, 2020, 12:22:48 am »
I haven’t really worked with yew (ha) so take this with a grain of salt, but the Mary rose bows look to be pretty heavily trapped in the one cross section pic I can find on google so you’re probably fine.

Offline willie

  • Member
  • Posts: 3,268
Re: Trapping a Yew self bow?
« Reply #2 on: November 09, 2020, 12:56:51 am »
Does yew sapwood have different qualities than yew heartwood?

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Trapping a Yew self bow?
« Reply #3 on: November 09, 2020, 02:22:33 am »
It doesn't really matter. I've made several with oval section limbs where the sapwood wraps rounds a tad, it just vies a nice coffee and cream look on the belly (or side).
I'd say keeping a bit of width may be more important to the stability and tiller of the bow.
You don't need to trap the back as it won't overpower the belly... the sapwood and heartwood have been married for so long they know how to put up with each other  ::) ;)
Del
Health warning, these posts may contain traces of nut.

Offline Badger

  • Member
  • Posts: 8,124
Re: Trapping a Yew self bow?
« Reply #4 on: November 09, 2020, 07:48:57 am »
  100% agree with Del

Offline DC

  • Member
  • Posts: 10,396
Re: Trapping a Yew self bow?
« Reply #5 on: November 09, 2020, 10:22:56 am »
This is just an aesthetics thing. I knew I didn't have to. In a few spots I just had too much cream ;D