Author Topic: Red Oak Recurve "Thor"  (Read 4904 times)

0 Members and 1 Guest are viewing this topic.

Offline dreamcraft_archery

  • Member
  • Posts: 129
Red Oak Recurve "Thor"
« on: November 05, 2020, 11:22:46 am »
Hi!

I've just finished new bow. It's Red oak recurve 70" ntn (following wood surface). The bow is drawing 50lbs at 28". Bog oak overlays and arrow shelf. Natural leather on handle and arrow pass. It's made from stave. Limbs at widest are 2,3". Linseed oil + varnish finish.

All the best!  (-_)

Offline dreamcraft_archery

  • Member
  • Posts: 129
Re: Red Oak Recurve "Thor"
« Reply #1 on: November 05, 2020, 11:23:42 am »
More of them. (B)

Offline Parnell

  • Member
  • Posts: 5,556
Re: Red Oak Recurve "Thor"
« Reply #2 on: November 05, 2020, 11:51:36 am »
Don’t get to see many red oak staves.  Nice work!
1’—>1’

Offline RyanY

  • Member
  • Posts: 1,999
Re: Red Oak Recurve "Thor"
« Reply #3 on: November 05, 2020, 11:54:44 am »
Love how the figure comes out on the sides. Red oak would be a nice bow wood to cut considering how absolutely massive some of the trees get.

Offline PaSteve

  • Member
  • Posts: 816
Re: Red Oak Recurve "Thor"
« Reply #4 on: November 05, 2020, 03:46:54 pm »
 Nice bow. Appears you use red oak often and do a great job with it.
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline Digital Caveman

  • Member
  • Posts: 1,117
  • formerly Tradcraftsman, formerly Yooper Bowyer
Re: Red Oak Recurve "Thor"
« Reply #5 on: November 05, 2020, 04:10:19 pm »
Don’t get to see many red oak staves.  Nice work!

You should come to my neck of the woods.  Red oak is one of the few bow trees that can grow up here.
God Bless America

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Red Oak Recurve "Thor"
« Reply #6 on: November 05, 2020, 05:19:57 pm »
Very nice red oak bow.  :OK  Red oak staves are not the same creature as Lowe's red oak board.
 We just had a 24" red oak uprooted in our yard when Beta came through. Fortunately it fell away from the house and truck.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Flntknp17

  • Member
  • Posts: 148
Re: Red Oak Recurve "Thor"
« Reply #7 on: November 05, 2020, 07:06:50 pm »
That is a REALLY beautiful bow!  I was just pondering this week about making an oak bow from a stave rather than from lumber.  I haven't tried it nor have I seen too many, but it works so well for board bows.  very nice!

Matt

Offline bassman

  • Member
  • Posts: 962
Re: Red Oak Recurve "Thor"
« Reply #8 on: November 06, 2020, 02:24:48 am »
Nice.

Offline Legolas11

  • Member
  • Posts: 5
Re: Red Oak Recurve "Thor"
« Reply #9 on: December 04, 2020, 01:09:51 am »
Nice looking bow. What are you using for a string? Seems like it has some stretch to it ...

bownarra

  • Guest
Re: Red Oak Recurve "Thor"
« Reply #10 on: December 04, 2020, 03:12:14 am »
Cool bow! :)
The only thing I would say is that you should round over the backs edges more.

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: Red Oak Recurve "Thor"
« Reply #11 on: December 08, 2020, 08:32:44 am »
What is on the limb on the last pic on left side between fade and mid limb? Different growth ring or rawhide? Don’t matter she a beauty. Arvin
Well I'll say!!  Osage is king!!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Red Oak Recurve "Thor"
« Reply #12 on: December 08, 2020, 09:10:01 am »
Beautiful bow! Well done! Jawge
Set Happens!
If you ain't breakin' you ain't makin!