« previous next »
Pages: [1]

Author Topic: Black Locust design for 22" @ 60-70#?  (Read 1138 times)

0 Members and 1 Guest are viewing this topic.

Offline eastcreekarchery

  • Member
  • Posts: 206
Black Locust design for 22" @ 60-70#?
« on: October 29, 2020, 10:27:04 pm »
Anyone know a design that will work?
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Black Locust design for 22" @ 60-70#?
« Reply #1 on: October 30, 2020, 12:58:06 am »
yes,, sinew backed about 48 inches,, shorter if you want,,1 1/2 wide slightly narrow at handle, 3 or 4 layers of sinew,, parallel limbs,,narrow at tips,,
I have one thats 50#@20 inches,, thats 1 1/4 wide,,the bow is 43 inches and holds reflex and no crysal
Logged

Offline eastcreekarchery

  • Member
  • Posts: 206
Re: Black Locust design for 22" @ 60-70#?
« Reply #2 on: October 30, 2020, 08:40:23 am »
Is sinew backing necessary at that length?
Logged

Online Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Black Locust design for 22" @ 60-70#?
« Reply #3 on: October 30, 2020, 08:54:42 am »
For a short locust bow I would sinew back it. For a longer bow(60" and up) I don't think the sinew backing would be necessary. BL has a tendency to fret if your tillering isn't spot on so a longish bow would be better ' wide and at least 1 1/2 and a semi pyramidal design.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline eastcreekarchery

  • Member
  • Posts: 206
Re: Black Locust design for 22" @ 60-70#?
« Reply #4 on: October 30, 2020, 09:12:18 am »
Ive made a longer bow w bl but i want to try a shorter one. Thanks for the advice!
Logged
Pages: [1]
« previous next »