Author Topic: Archaeology drawing, am I reading it correctly  (Read 1627 times)

0 Members and 1 Guest are viewing this topic.

Offline stuckinthemud

  • Member
  • Posts: 2,348
    • avenue woodcarving
Archaeology drawing, am I reading it correctly
« on: October 21, 2020, 05:11:57 pm »
Ok, so I see this as a yew branch with a lttle reflex, the sapwood heavily reduced in thickness but chased to a whole ring  with the belly heavily trapped
Yes, a crossbow, from 1040ad France, possibly the oldest known . It's 110cm ttt. View is side on, I haven't got a front view. What do you think, am I far off?

Offline Hamish

  • Member
  • Posts: 1,551
Re: Archaeology drawing, am I reading it correctly
« Reply #1 on: October 22, 2020, 06:49:48 pm »
The orientation of the nocks and the belly cross section suggests you are correct.

Offline PatM

  • Member
  • Posts: 6,737
Re: Archaeology drawing, am I reading it correctly
« Reply #2 on: October 22, 2020, 07:08:00 pm »
I think you're guessing on the reduced sapwood to one ring.  The cross section at the center seems more like it's shaped to fit a tiller notch.  I doubt the whole  limb s that shape.   

bownarra

  • Guest
Re: Archaeology drawing, am I reading it correctly
« Reply #3 on: October 23, 2020, 01:29:06 am »
It's not a very good drawing ;) Who knows without seeing it.

Offline stuckinthemud

  • Member
  • Posts: 2,348
    • avenue woodcarving
Re: Archaeology drawing, am I reading it correctly
« Reply #4 on: October 23, 2020, 04:56:24 am »
I think you're guessing on the reduced sapwood to one ring.  The cross section at the center seems more like it's shaped to fit a tiller notch.  I doubt the whole  limb s that shape.   
ooh, that made a penny drop into place, the marks at the centre are compression damage where the tiller has pressed into the belly.  Thanks Pat. Yes, I am guessing about the reduced sapwood, but looking at how little of the crown is left at the tips it doesnt seem entirely unreasonable.
« Last Edit: October 23, 2020, 05:00:25 am by stuckinthemud »

Offline stuckinthemud

  • Member
  • Posts: 2,348
    • avenue woodcarving
Re: Archaeology drawing, am I reading it correctly
« Reply #5 on: November 14, 2020, 09:21:48 am »
Got a couple more details, its elm, not yew, 4cm wide and 3cm thick at centre.  The elm is complicating things for me; since Dutch Elm Disease wiped out most of the trees in my region, I can't get hold of any from my usual suppliers.  Any of the UK builders able to point me in the direction of a decent supplier??

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Archaeology drawing, am I reading it correctly
« Reply #6 on: November 14, 2020, 09:35:21 am »
It looks to fit into a saddle of sorts in the center, with a faceted somewhat round cross section in the center of the limbs that taper to a triangular tip. I would guess that it came from a smaller branch or sapling given the crown throughout, pretty knotty stuff at that.