« previous next »
Pages: [1]

Author Topic: Osage Knot Oopsy  (Read 1780 times)

0 Members and 1 Guest are viewing this topic.

Offline Fox

  • Member
  • Posts: 997
Osage Knot Oopsy
« on: October 18, 2020, 07:43:17 pm »
I was going to make this a unbacked slightly bend in the handle 58" - 60" long,  1.5" wide at fades, straight taper to 1/2" tips, 50 at 27".... not sure if that is proper design or not. but the problem is I accidentally cut to close to this knot. its right in the fade. advice?


Untitled by Livvydog, on Flickr

-Fox
Logged
Why must we make simple things so complicated?

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Osage Knot Oopsy
« Reply #1 on: October 18, 2020, 09:45:40 pm »
need to see picture of whole bow,,
Logged

Offline Fox

  • Member
  • Posts: 997
Re: Osage Knot Oopsy
« Reply #2 on: October 18, 2020, 11:22:45 pm »
Here ya go... ;)

Untitled by Livvydog, on Flickr

Untitled by Livvydog, on Flickr

by Livvydog, on Flickr
Logged
Why must we make simple things so complicated?

bownarra

  • Guest
Re: Osage Knot Oopsy
« Reply #3 on: October 19, 2020, 01:33:56 am »
Finish your rough out and get everything neat, tapers roughed in and then you will be able to tell.
Logged

Offline Fox

  • Member
  • Posts: 997
Re: Osage Knot Oopsy
« Reply #4 on: October 19, 2020, 10:13:24 am »
It’s pretty close to ruffed out...
Logged
Why must we make simple things so complicated?

Offline TimBo

  • Member
  • Posts: 1,047
Re: Osage Knot Oopsy
« Reply #5 on: October 19, 2020, 10:24:34 am »
If all of the wood left around the knot in that first photo is solid/unviolated, I think you left enough.  If you dinged it up somehow, a closer-up photo would help.
Logged

Offline Fox

  • Member
  • Posts: 997
Re: Osage Knot Oopsy
« Reply #6 on: October 19, 2020, 11:54:38 am »
Close up coming up... no violation on the back of the bow.. I just didn’t think I left enough around the knot...  I dunno though
Logged
Why must we make simple things so complicated?

Offline Fox

  • Member
  • Posts: 997
Re: Osage Knot Oopsy
« Reply #7 on: October 19, 2020, 12:07:22 pm »
Untitled by Livvydog, on Flickr
Logged
Why must we make simple things so complicated?

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Osage Knot Oopsy
« Reply #8 on: October 19, 2020, 12:13:38 pm »
I think it's OK. It's not gold, just finish the bow and see if it works.
Logged
Jim Davis

Kentucky--formerly Maine

Offline Fox

  • Member
  • Posts: 997
Re: Osage Knot Oopsy
« Reply #9 on: October 19, 2020, 12:16:59 pm »
okay jim.... would wraping that spot with linen or sinew or something like that help? this is my first and only real osage stave so id really like to get a bow out of it... it doesn't have to be the bow I first described just any shooter.
Logged
Why must we make simple things so complicated?

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Osage Knot Oopsy
« Reply #10 on: October 19, 2020, 12:24:01 pm »
it should be ok,, just dont make it bend in that spot when you tiller
Logged

Offline Fox

  • Member
  • Posts: 997
Re: Osage Knot Oopsy
« Reply #11 on: October 19, 2020, 12:27:05 pm »
okay so should I go for a stiff handle? or can I make everywhere but there bend? sorry so many questions, I just really want a sweet one from this stave!
Logged
Why must we make simple things so complicated?

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Osage Knot Oopsy
« Reply #12 on: October 19, 2020, 01:27:16 pm »
just go for stiffer in the handle,,
Logged

Offline TimBo

  • Member
  • Posts: 1,047
Re: Osage Knot Oopsy
« Reply #13 on: October 19, 2020, 02:21:09 pm »
That doesn't look bad at all - just carefully clean it up, and as others said, keep it from bending too much.  Don't use a draw knife anymore at this point around the knot, as it's very easy to snag and tear grain.
Logged
Pages: [1]
« previous next »