Author Topic: Primitive wood sealer to finish a selfbow  (Read 2100 times)

0 Members and 1 Guest are viewing this topic.

Offline eastcreekarchery

  • Member
  • Posts: 206
Primitive wood sealer to finish a selfbow
« on: October 11, 2020, 06:30:08 pm »
Hello everyone. Was wondering if anyone knew of a good primitive sealer for bows. I was going to use truoil finish but i thought my selfbow deserved something more traditional. Thanks!

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Primitive wood sealer to finish a selfbow
« Reply #1 on: October 11, 2020, 10:13:43 pm »
Tallow and beeswax.
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Primitive wood sealer to finish a selfbow
« Reply #2 on: October 11, 2020, 10:32:29 pm »
Animal grease. I've used venison grease from cooking it. I got lucky. :)
Rub it on and slightly heat the bow.
I've also used bacon grease. I'm not sure I'd use it in bear country. :)
Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Santanasaur

  • Member
  • Posts: 265
Re: Primitive wood sealer to finish a selfbow
« Reply #3 on: October 12, 2020, 07:26:40 am »
Drying oils like linseed or tung can build up a good finish but it takes a lot of patience. Shellac is easy and quick to apply and also traditional. I’ve also made varnish with pine resin and turpentine but that stayed tacky for days before the layers got hard

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Primitive wood sealer to finish a selfbow
« Reply #4 on: October 12, 2020, 07:49:52 am »
i like beeswax. if you have a good beeswax finish on a bow and you pour water on it there is no way that waters going to soak in on its own or get the wood wet. thats not to say that it wont if you rub the water in though. makes kindof a sticky finish though.
Life before death. Strength before weakness. Journey before destination.

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: Primitive wood sealer to finish a selfbow
« Reply #5 on: October 12, 2020, 09:11:21 am »
  I use crystallized pine pitch, lard and bees wax mixture...1 part pitch, 1 part bees wax and 2 parts lard...Melt down and stir well on low heat and allow to cool...If it's not soft like paste wax I add more lard until I can wipe on...After application I use heat and rub in to the wood pores...Water beads up for a long time...Also use this mixture on sinew, rawhide and linen bow strings...You can play with the matrix for what works best for you...
                                                                                                      Don
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline eastcreekarchery

  • Member
  • Posts: 206
Re: Primitive wood sealer to finish a selfbow
« Reply #6 on: October 12, 2020, 05:58:43 pm »
I think ill experiment with all of there suggestions. Ill be sure to let yall know what i use!

Offline Fox

  • Member
  • Posts: 995
Re: Primitive wood sealer to finish a selfbow
« Reply #7 on: October 14, 2020, 05:39:55 pm »
Lots of good advice..: I use beezwax, or Shalac

-Fox
Why must we make simple things so complicated?

Offline Digital Caveman

  • Member
  • Posts: 1,117
  • formerly Tradcraftsman, formerly Yooper Bowyer
Re: Primitive wood sealer to finish a selfbow
« Reply #8 on: October 14, 2020, 06:43:48 pm »
These finishes bead water, but how well do they work against prolonged humidity?
God Bless America

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Primitive wood sealer to finish a selfbow
« Reply #9 on: October 15, 2020, 12:43:52 am »
I think if they are applied and maintained, they should work well!  Most were developed by primitive methods in a variety of climates!  Nothing will work if not maintained!
Hawkdancer
Life is far too serious to be taken that way!
Jerry