« previous next »
Pages: 1 [2]

Author Topic: Heat treat  (Read 2252 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,611
Re: Heat treat
« Reply #15 on: October 09, 2020, 08:40:25 am »
Bob, I'm with you on this. I wait at least a day after heat alterations and bending and a bit longer for heat treating. Like other aspects of wood bow building there is no need to get in a rush.   :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Allyn T

  • Member
  • Posts: 1,397
  • I'm addicted to information
Re: Heat treat
« Reply #16 on: October 09, 2020, 12:11:43 pm »
Speaking of wood moisture, my moisture meter says my bow is around 8.3% and my humidity meter was reading about 45% so that would be close. How long does it take for wood to take on water? My bow weighed the same 2 days in a row but last night my humidity went up to 55% and my bow was about a half ounce heavier today but the meter was reading pretty much the same as before 8.3%
Logged
In the woods I find my peace

gutpile

  • Guest
Re: Heat treat
« Reply #17 on: October 09, 2020, 01:05:45 pm »
I only heat treat white woods... I draw 27 so I long string till 20 before I low brace... I exclusively use a tiller tree cable set up and threw away the tiller stick... no need to heat treat so early ...IMO.. If I am gong to heat treat I do it when adjustment to line up limbs ... gut
Logged
Pages: 1 [2]
« previous next »