« previous next »
Pages: [1]

Author Topic: Tillering boot  (Read 1278 times)

0 Members and 1 Guest are viewing this topic.

Offline Kidder

  • Member
  • Posts: 632
Tillering boot
« on: September 05, 2020, 08:10:19 pm »
So I couldn’t seem to find any template online for building a tillering boot for a long string, so decided to wing it. I traced the pattern onto leather, cut it out, punched the holes, laced it up, and strung on a nylon rope as a long string. Hopefully these pictures helps someone who is scratching their head how to do it. Haven’t tried it yet but if I can’t build this successfully I probably have no business in the hobby (bring on the comments on how it was all wrong!)
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Tillering boot
« Reply #1 on: September 05, 2020, 09:49:04 pm »
Looks like they should work.  I just use a loop and a Bowyer's knot and adjust as I go.  Let us know.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

bownarra

  • Guest
Re: Tillering boot
« Reply #2 on: September 06, 2020, 12:14:18 am »
Next time fold the edges over so your string goes through a few layers not just one.
Logged

Offline Kidder

  • Member
  • Posts: 632
Re: Tillering boot
« Reply #3 on: September 06, 2020, 10:32:13 am »
Quote from: bownarra on September 06, 2020, 12:14:18 am
Next time fold the edges over so your string goes through a few layers not just one.
Ha! You are correct, that is a better idea! I knew I couldn’t build one right! On an aside it does work just fine though.
Logged
Pages: [1]
« previous next »