« previous next »
Pages: [1]

Author Topic: Tension crack repair  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Offline mutt

  • Member
  • Posts: 52
Tension crack repair
« on: September 03, 2020, 04:36:38 pm »
What would be your choice of glue?
Given:
The crack was straight across.
You could brace the bow and get a thicker glue all the way to the end of the split.
Logged

Offline mutt

  • Member
  • Posts: 52
Re: Tension crack repair
« Reply #1 on: September 03, 2020, 04:46:51 pm »
Should also mention that the bow is 66" 45# @28" , semi bend in the handle and the crack is about 10" above the handle. Tiller ed well and have no idea why or when it broke
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tension crack repair
« Reply #2 on: September 03, 2020, 04:57:24 pm »
Tension cracks are almost impossible to repair. Only way I know of is to grind the back flat and back with hickory, maple of other hard backings.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

bownarra

  • Guest
Re: Tension crack repair
« Reply #3 on: September 04, 2020, 12:00:29 am »
If you knew why it cracked it might be worth grinding the back below the crack and sinewing etc it. If the back broke for 'no reason' it might be worth saying good bye to it before it gives you more headaches!
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Tension crack repair
« Reply #4 on: September 04, 2020, 04:15:29 pm »
I agree might be something wrong with the wood,,
but glue not gonna hold it,,,
I have sinew wrapped places that were bad,, just to see what would happen,, with mixed results,, I am not recommending that, but just letting you know you are not the only one that has tried to fix same issues,,,
Logged
Pages: [1]
« previous next »