Author Topic: Compression wood  (Read 2612 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Compression wood
« on: August 30, 2020, 02:36:03 pm »
Every so often I wonder about different wood I could use for the belly so I go off to the Wood Database. To my way of thinking "Crushing Strength" would be the criteria for compression but in looking at the numbers they don't seem to follow common use for bows. For example Black Locust shows a higher CS than Osage. Crushing strength is, I imagine, crushing to yield and we want crushing to just shy of yield and the ability to recover from that. Is there another number that I could use in combination with Crushing strength. Yew is 8100 so I imagine I want 8000 or better but I'm not sure. Ipe is 13,600. Anything you can add?

Offline Selfbowman

  • Member
  • Posts: 3,119
Re: Compression wood
« Reply #1 on: August 30, 2020, 02:58:57 pm »
Don’t know about that DC but I depend on density and use that for compression. The more dense the better the compression. I could be all wrong. The more dense the more weight unfortunately. No scientific proof just what I have observed. Also it has been said here the best bow will come from a good balance of tension and compression. Also that changes with design. And the can of worms gets bigger and bigger . Arvin
Well I'll say!!  Osage is king!!

Offline PatM

  • Member
  • Posts: 6,737
Re: Compression wood
« Reply #2 on: August 30, 2020, 04:03:42 pm »
It's the elasticity in compression that matters more.  Many great bow woods are not particularly compression strong.

Offline DC

  • Member
  • Posts: 10,396
Re: Compression wood
« Reply #3 on: August 30, 2020, 04:45:45 pm »
Pat, I think you're using the term, elasticity, the way I would. It's the "springiness" we talked about a while back. The "Modulus of Elasticity" that the Wood Database uses seems to be something else. They refer to it as an indicator of strength or stiffness. I guess I was hoping for something that doesn't exist, a chart of springiness or hysteresis.

Offline Weylin

  • Member
  • Posts: 2,296
Re: Compression wood
« Reply #4 on: August 30, 2020, 08:01:40 pm »
I'm curious about black locust. I've heard some say that it is high in compression but some other factor makes it prone to chrysals, perhaps the elasticity or lack there of.

Offline DC

  • Member
  • Posts: 10,396
Re: Compression wood
« Reply #5 on: August 30, 2020, 08:09:06 pm »
I'm curious about black locust. I've heard some say that it is high in compression but some other factor makes it prone to chrysals, perhaps the elasticity or lack there of.
That caught my eye. If the "Crushing Strength" is until failure you'd think that a chrysal would be a failure and Osage should score better than BL. I wouldn't think that elasticity would enter into their test. I'm thinking that must be a typo.

Offline Selfbowman

  • Member
  • Posts: 3,119
Re: Compression wood
« Reply #6 on: August 30, 2020, 09:09:55 pm »
Ok I’m watching. Keep going guys. Arvin
Well I'll say!!  Osage is king!!

Offline PatM

  • Member
  • Posts: 6,737
Re: Compression wood
« Reply #7 on: August 30, 2020, 09:28:20 pm »
You need to look at the tests  done by bending, not the direct crushing or pulling apart tests.

   Young's modulus and work to maximum load etc.    Look at known good bow woods and isolate key features.  Then you can find numbers of woods not typically used and compare.   I will say that almost every feasible bow wood has been tested at some point it seems.

 A guy on Paleoplanet  did a collection of wood data and charted  it several years ago.     Good bow woods made a pretty scattered bunch of dots on his chart though.  The one with the best numbers seemed to be some type of Rosewood not used for bows generally.   

bownarra

  • Guest
Re: Compression wood
« Reply #8 on: August 30, 2020, 11:57:04 pm »
To be honest I would forget the numbers and just use a simple bend test.
Modulus of elasticity is no good for a bent limb and its ability to spring back.....moe is simply can the object have a load applied directly to it and return to normal shape once the load is removed. It is not bending data! Unless you want to drive your car over your bow it is of little use :)
Also was it straight grained, nicely dried wood they used in the first place.....NO!

Offline willie

  • Member
  • Posts: 3,231
Re: Compression wood
« Reply #9 on: August 31, 2020, 12:45:02 am »
Pat, I think you're using the term, elasticity, the way I would. It's the "springiness" we talked about a while back. The "Modulus of Elasticity" that the Wood Database uses seems to be something else. They refer to it as an indicator of strength or stiffness. I guess I was hoping for something that doesn't exist, a chart of springiness or hysteresis.
you are correct Don. springiness or elascity is not related to MOE or stiffness.
yew and spruce are both woods of similar stiffness, except yew will bend twice as far (roughly) than spruce without taking set or breaking.   ipe and osage are both stiff woods, osage of course being much better for being able to bend further.

we can make a similar width of the same poundage bow with both spruce or yew. the yew in that designs thickness will be "overbuilt", because we have not asked it to do all that it is capable of. Building the yew bow as a thicker bow would be more in line with yews potential. the thicker bow would be narrower of course, when built to the same draw weight.  if only yew were as stiff as ipe.....

https://www.tapatalk.com/groups/paleoplanet69529/picking-a-wood-for-a-bow-t28706.html


Offline simk

  • Member
  • Posts: 1,159
Re: Compression wood
« Reply #10 on: August 31, 2020, 01:46:33 am »
DC, here's a pic that visualize a fatal compression failure. See the frets and finally a clean cut of fibres on the belly...
Willie: You are right. I did the same bow with yew/ash and (compression)spruce/ash. For the same drawweight the spruce bow clearly needed more thickness and more mass (weight). Regarding commonly used bowwoods Osage, yew and ipe seem to be unbeatable in compression.
--- the queen rules ----

Offline Rākau

  • Member
  • Posts: 244
  • Aotearoa-the land of the long white cloud
Re: Compression wood
« Reply #11 on: August 31, 2020, 02:53:30 am »
DC: my understanding of the crushing strength test is that they use a hydraulic ram to push a half round ball bearing a given depth into a piece of wood. The numbers relate to the force required to reach said given depth. So useful in telling us how much abuse in the woods our bows could take, but probably not much else. This cold also explain why locust has better numbers in this regard than osage, despite it's tendency to chrysal when under a longitudinal compressive load.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Compression wood
« Reply #12 on: August 31, 2020, 07:01:13 am »
Pat, I think you're using the term, elasticity, the way I would. It's the "springiness" we talked about a while back. The "Modulus of Elasticity" that the Wood Database uses seems to be something else. They refer to it as an indicator of strength or stiffness. I guess I was hoping for something that doesn't exist, a chart of springiness or hysteresis.

The published numbers for MOE is the reverse of what you need when making bows, that is to say the lower the number in relation to the wood density is better.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline DC

  • Member
  • Posts: 10,396
Re: Compression wood
« Reply #13 on: August 31, 2020, 10:09:31 am »
DC: my understanding of the crushing strength test is that they use a hydraulic ram to push a half round ball bearing a given depth into a piece of wood. The numbers relate to the force required to reach said given depth. So useful in telling us how much abuse in the woods our bows could take, but probably not much else. This cold also explain why locust has better numbers in this regard than osage, despite it's tendency to chrysal when under a longitudinal compressive load.
That's the "Hardness Test" isn't it? Yes, it is, I just looked.

Offline DC

  • Member
  • Posts: 10,396
Re: Compression wood
« Reply #14 on: August 31, 2020, 11:37:02 am »

 A guy on Paleoplanet  did a collection of wood data and charted  it several years ago.     Good bow woods made a pretty scattered bunch of dots on his chart though.  The one with the best numbers seemed to be some type of Rosewood not used for bows generally.   
I guess archers that actually know what the numbers mean have combed through these charts. I'm wasting my time doing it again when I don't know what I'm looking at ;D