Author Topic: Finish over jute wrap (Read 1150 times)

stuckinthemud · « **on:** August 05, 2020, 02:00:34 pm »

Hi guys, can I use a finishing oil over a jute wrap?

Pat B · « **Reply #1 on:** August 05, 2020, 02:31:17 pm »

I haven't used jute handle wrap but on the hemp wraps I do I use Massey finish, 2 part epoxy thinned with acetone.

Stickhead · « **Reply #2 on:** August 05, 2020, 03:47:33 pm »

I’ve put Tru Oil over a jute wrap, and it worked fine. (Until my bow got run over, that is. It didn’t protect against that worth a darn.)

dylanholderman · « **Reply #3 on:** August 05, 2020, 09:20:08 pm »

i cant speak to a oil finish but i have done the epoxy finish over a wrap before.
i just used 5min epoxy thinned with 70% isopropoyl alcohol.

bownarra · « **Reply #4 on:** August 06, 2020, 12:08:30 am »

Just use watered down pva over the wrap. Lasts for ever.

HighEagle · « **Reply #5 on:** August 06, 2020, 11:27:43 pm »

Jute handle wrap finished with Titebond III till dry, Acrylic paint till dry, Some more TB III dry, Then rubbed in some sticky beeswax

Hrothgar · « **Reply #6 on:** August 07, 2020, 05:48:57 am »

A few years back I was putting jute on everything -- thought it looked more primitive. Generally TBll, but also Polyurethane, even just bare.

Primitive Archer