« previous next »
Pages: [1]

Author Topic: Finish question  (Read 1086 times)

0 Members and 1 Guest are viewing this topic.

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Finish question
« on: June 02, 2020, 11:03:26 am »
So I have watco danish clear finish or whatever it’s called and it’s reaaaaalllyy yellowed the Wood. I want to take it off and put a boiled linseed oil finish on. Do I just sand the bow until all the finish is off and then apply the linseed oil?
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Ricardovanleeuwen

  • Member
  • Posts: 403
Re: Finish question
« Reply #1 on: June 02, 2020, 11:34:30 am »
If its An oily finnish u can try acetone
Logged

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Finish question
« Reply #2 on: June 02, 2020, 11:36:21 am »
Ok that’s a good idea
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Finish question
« Reply #3 on: June 02, 2020, 12:26:45 pm »
Wire wool and white spirit.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline stuckinthemud

  • Member
  • Posts: 2,348
    • avenue woodcarving
Re: Finish question
« Reply #4 on: June 02, 2020, 01:27:22 pm »
Washing up liquid and warm water
Logged
Pages: [1]
« previous next »