Author Topic: What glue  (Read 1327 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
What glue
« on: May 26, 2020, 01:18:47 pm »
What glue is the best to use on a leather shelf pad that you might want to remove later?  Something that would clean off easily.   I normally use self adhesive velcro or super glue the leather on.  I'm looking on a better option to use with a leather pad.
I started out with nothin' and I still got most of it left

Offline DC

  • Member
  • Posts: 10,396
Re: What glue
« Reply #1 on: May 26, 2020, 01:46:31 pm »
How about hide glue? It comes off very clean with water. Depends on where you're going to use the bow though.

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: What glue
« Reply #2 on: May 26, 2020, 02:02:19 pm »
   Clint,
            Barge cement may be a good option...I used it years ago with trad bows
                                                                                                                          Don
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: What glue
« Reply #3 on: May 26, 2020, 02:50:36 pm »
Yep barge or contact cement comes right off with the heat gun or hair dryer !
If you fear failure you will never Try !

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: What glue
« Reply #4 on: May 26, 2020, 03:14:58 pm »
Contact cement. It will rub right off a bow's finish and sticks fine to Tru-Oil and poly.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: What glue
« Reply #5 on: May 26, 2020, 04:03:18 pm »
I use a hot glue gun for the stuff like that

Offline Hamish

  • Member
  • Posts: 1,557
Re: What glue
« Reply #6 on: May 26, 2020, 04:46:03 pm »
+ 1 for barge cement, or other brand of contact adhesive.

For a long term bond you apply adhesive to both surfaces. For an easy to remove bond, only apply to one surface, you can peel it off by hand pressure alone.

Offline Will B

  • Member
  • Posts: 1,022
Re: What glue
« Reply #7 on: May 26, 2020, 05:20:17 pm »
I really like barge cement also for rest and strike plate

Offline Weylin

  • Member
  • Posts: 2,296
Re: What glue
« Reply #8 on: May 26, 2020, 06:16:34 pm »
another vote for contact cement.

Offline bentstick54

  • Member
  • Posts: 770
Re: What glue
« Reply #9 on: May 26, 2020, 09:50:37 pm »
I use Barge cement also. Easy on, easy off.

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: What glue
« Reply #10 on: May 27, 2020, 07:30:23 am »
I like Barge, you can rub most of it off and do a final cleanup with Naptha, it will remove the glue and not harm your finish.