« previous next »
Pages: [1]

Author Topic: String follow?  (Read 854 times)

0 Members and 1 Guest are viewing this topic.

Offline snag

  • Member
  • Posts: 419
String follow?
« on: May 27, 2020, 07:33:34 am »
I have a yew ELB that was 75#@27”. It is backed with rawhide. I believe it was built in the early 80’s by a local man. Not my draw weight at this stage, or any other stage, of my life! It was tillered beautifully. So I used a cabinet scraper, being timid, to take wood off evenly. All the while rechecking tiller. I got it down to 54#@27”. After shooting it over the past week I noticed about 3/4” string follow. Within an 1/2 hour after shooting it goes back to it’s original form. Is this normal or acceptable in this design?
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: String follow?
« Reply #1 on: May 27, 2020, 07:37:48 am »
Yep. It's fine. Just enjoy it.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline PatM

  • Member
  • Posts: 6,737
Re: String follow?
« Reply #2 on: May 27, 2020, 07:39:43 am »
Was the bow used much before?  That may have been its typical response to a stringing and shooting session before as well.

  Have you re-sealed it?   

 eta: fingers crossed this doesn't turn into 10 pages of  discussing the difference between set and string follow.
« Last Edit: May 27, 2020, 07:45:19 am by PatM »
Logged

Offline snag

  • Member
  • Posts: 419
Re: String follow?
« Reply #3 on: May 27, 2020, 08:50:56 am »
It’s past life is unknown. Yes I have sanded down to 500 grit and applied 6 coats of Truoil.
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.
Pages: [1]
« previous next »