Author Topic: Heat & steam twisting  (Read 829 times)

0 Members and 1 Guest are viewing this topic.

Offline NewBowyer

  • Member
  • Posts: 105
Heat & steam twisting
« on: May 12, 2020, 04:11:04 pm »
I have a stave I cut early in this journey that I've since learned is unlikely to make a bow but I decided to see how far I could take it anyway, for practice. It had a bad twist in one limb that didn't get any better as I began tillering so I figured, more practice for an "advanced" (for me!) technique. I heated it over a pan of water on the grill and Whaddaya know, it seems to have worked! So far... ::) My question is how long to wait before unclamping it? It's cool to the touch but should I leave it overnight to be safe?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Heat & steam twisting
« Reply #1 on: May 12, 2020, 06:52:16 pm »
I would keep it clamped over night just to be sure it is completely cooled inside and out.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC