« previous next »
Pages: [1]

Author Topic: Two woods  (Read 1831 times)

0 Members and 1 Guest are viewing this topic.

Offline Bowyer23

  • Member
  • Posts: 55
Two woods
« on: May 01, 2020, 05:35:31 pm »
Just waiting for the glue to dry on two billets that I had lying around, one being Osage and the other being white oak..

Don't expect much obviously just kind of thought it'd be an interesting experiment..

Has anyone else tried to make a bow with different wood for each of the limbs? If so how did you go?

I know the wood will have different properties and potentially be really hard to tiller into so both limbs bend evenly, as I said though just a bit of an experiment.

Let us know your experiences doing this..or just any thoughts you may have :)
Logged

Offline RyanY

  • Member
  • Posts: 1,999
Re: Two woods
« Reply #1 on: May 01, 2020, 05:48:07 pm »
It’s been done. I’ve seen a few Osage/Yew limbed bows by some folks with a ton of experience. My understanding is that they work just fine. If I were making one with two different woods, I’d just adjust the width between the woods unless it is a wood like yew, ERC, or juniper, in which case those woods would end up with slightly thicker limbs.
Logged

Offline Bowyer23

  • Member
  • Posts: 55
Re: Two woods
« Reply #2 on: May 02, 2020, 08:46:56 am »
Thanks for the reply :)

I'll tell you what it looks weird having completely different limbs haha
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Two woods
« Reply #3 on: May 02, 2020, 09:03:56 am »
Go by the tiller and not the thickness of each limb and you should be OK.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline HH~

  • Member
  • Posts: 1,742
Re: Two woods
« Reply #4 on: May 02, 2020, 09:52:39 am »
Yes

HH~
Logged
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline hoosierf

  • Member
  • Posts: 492
Re: Two woods
« Reply #5 on: May 02, 2020, 10:06:42 am »
 (-P
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Two woods
« Reply #6 on: May 02, 2020, 10:56:46 am »
 (-P (-P, but with cashews! (lol)
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Bowyer23

  • Member
  • Posts: 55
Re: Two woods
« Reply #7 on: May 04, 2020, 04:07:21 am »
Starting to somewhat take shape. Lots of tillering  to go.

On a separate note.. how good is FibreFix for reinforcing a spliced handle.
Logged

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Two woods
« Reply #8 on: May 04, 2020, 04:18:58 am »
You are running into some massive problems ...
- Before bending a stick you should carefully watch the side taper! Your stick is thicker in some outer portions than midlimb.
- Looks like you have a massive hinge in the right fade >>>edit: of course left fade!
- Looks like string alignment doesn't match

Good luck on this one!
« Last Edit: May 05, 2020, 01:14:15 am by simson »
Logged
Simon
Bavaria, Germany

Offline Bowyer23

  • Member
  • Posts: 55
Re: Two woods
« Reply #9 on: May 04, 2020, 05:09:40 am »
Haha yeah don't worry I'm aware of all these issues, my splice cutting has never been very good which has caused some issues.

But as I said I'm aware of all these problems and just wanted to get it up and bending a tiny bit to show how it's looking :)

I appreciate the advice though:)
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Two woods
« Reply #10 on: May 04, 2020, 05:53:22 am »
Yes I did an Osage and BL , Will did an Osage and Yew and Davy also a yew and Osage, like Pat said just watch the tiller and not the limb thickness or size. They all shot fine. Good luck. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

bownarra

  • Guest
Re: Two woods
« Reply #11 on: May 04, 2020, 07:56:14 am »
Yes I did an osage/yew once. The Osage limb was a short recurve and the yew was a longbow limb....it shot like a dog! Couldn't get the thing balanced because the limbs worked differently and weighed different amounts.
Logged

Offline Bowyer23

  • Member
  • Posts: 55
Re: Two woods
« Reply #12 on: May 04, 2020, 04:01:27 pm »
Interesting to see such contrasting views in the last two comments! I'll keep you updated on how it ends up:)
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Two woods
« Reply #13 on: May 08, 2020, 01:21:34 am »
Quote from: simson on May 04, 2020, 04:18:58 am
- Looks like you have a massive hinge in the right fade >>>edit: of course left fade!

Well, not as much but right fade out has a hing, too.

Logged
Frank from Germany...
Pages: [1]
« previous next »