Author Topic: Hedge/Osage stave storage **** updated with haul load  (Read 5535 times)

0 Members and 1 Guest are viewing this topic.

Offline jamesh76

  • Member
  • Posts: 148
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #15 on: April 16, 2020, 12:28:10 pm »
Thanks, about half of the osage has a little twist I'll have to take out on caul.

Offline jamesh76

  • Member
  • Posts: 148
Re: Hedge/Osage stave storage
« Reply #16 on: April 16, 2020, 12:40:18 pm »
Go for it James.I did.It'll be worth it.I've done hundreds.
We have crews around here that cut fence posts for a living.Thousands of them over a summer.

I say go for it to. I’m not trying to discourage you. Just getting you prepared.
Bjrogg
no worries. I just wanted it on hand for now. Knowing it will be quite a while before I can use it. I will prep and store it the best I can. If I lose a few, that's ok. The hardest part for someone getting into this is lack of available wood. I bough all 4 TBB books, so I got some learning to do. That and all the great posts here will be very beneficial when the time comes for using what I cut.  Besides, I got a 17 year old that needs to learn with me :)

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #17 on: April 16, 2020, 12:45:38 pm »
Good sound plan James.Many times a little twist does'nt bother at all.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #18 on: April 16, 2020, 01:38:48 pm »
To get a belly split just use a hatchet or sharp wedge and line it up with a growth ring.  Sometimes the solit will follow ot and other times it runs off.  Start on the small end of the stave.  Make sure you have enough wood before you start taking belly or side splits.   Seal those ends as soon as possible.  I seal them as soon as the chainsaw is shut off.  I seal them again when I get home and again when I seal the backs.   A gallon of TB wood glue thinned down with a little water makes a good and cheap sealer.
I started out with nothin' and I still got most of it left

Offline Swampman

  • Member
  • Posts: 1,046
  • Primitive Archer subscription number PM109299
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #19 on: April 16, 2020, 03:37:23 pm »
Nice looking haul.  I am jealous of all of you that live in osage country.  It doesn't grow in Minnesota.

That looks like a lot of fun and work. Sometimes those two things are the same though.  I would say that is the case with harvesting staves.

Offline jamesh76

  • Member
  • Posts: 148
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #20 on: April 16, 2020, 07:13:39 pm »
Quite a bit of twist in some of the osage. Got some split down smaller. 2 1/2 down to rough stave size. 3 1/2 -4" wide. Sealed ends and back with glue. Got bark and sapwood off. Down to a ring for most of the length but not the ring I will eventually chase. Hard work, but I'm enjoying it and look forward to the rewards. I imagine I will make my first few from hickory or mulberry. Likely the smaller pieces because they are straighter. Then move onto a osage piece due to the challenge of the curves.

Offline jamesh76

  • Member
  • Posts: 148
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #21 on: April 16, 2020, 08:49:21 pm »
Got 4 done.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #22 on: April 16, 2020, 09:20:46 pm »
You lost a shoe and a sock in the process?   You must have been working really hard.  I know it's a lot of work but removing dried sapwood is even worse.  Seal those backs.
I started out with nothin' and I still got most of it left

Offline jamesh76

  • Member
  • Posts: 148
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #23 on: April 16, 2020, 09:46:53 pm »
You lost a shoe and a sock in the process?   You must have been working really hard.  I know it's a lot of work but removing dried sapwood is even worse.  Seal those backs.
that's my son's sock and shoe lol.  I sealed back and ends with Elmer's. Will chase final ring when I make them. The one inwentbtoo may be good. Just need to clean up around knots some of I use where it's at. I got 4 done and about 30 to go. I cut 1 really small sapling.... maybe 2" but it didnt look like it had any knots or limbs for about 7' of length. I'm sure there are. Will be interesting if I can get it too work. I plan to get a piece of hackberry close to dimensions and put in one of our extra vehicles to hopefully speed up drying. Its not hot here yet but will be before long.

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #24 on: April 16, 2020, 11:54:45 pm »
Nice hail!  If you have too many, let me know!  First dibs!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline jamesh76

  • Member
  • Posts: 148
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #25 on: April 17, 2020, 11:26:58 am »
You sure learn alot about your staves as you watch how they split and learn their characteristics while debarking and removing sapwood. Alot of times it seems to me it changes what you though you had before.   Some split well, others split thick on one end and end up 1/2 as wide on the other as it follows the grain.

Offline jamesh76

  • Member
  • Posts: 148
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #26 on: April 17, 2020, 12:24:52 pm »
 Holy twist batman!  Idk if I will ever have the skill for this one. Almost tossed it.  It was split from the triangle on one I got 3 staves. Chased a ring best I could for now. Was really good practice. Odd enough, the other 2 pieces from this one didnt show alot of twist on outside ring. This one almost 90 degree.

Offline Hawkdancer

  • Member
  • Posts: 5,039
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #27 on: April 17, 2020, 02:02:45 pm »
Stick it under the good ones, and by the time you get to it, you will have developed your skill set? :BB or  (--) >:D (lol). Good luck with all of them!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline jamesh76

  • Member
  • Posts: 148
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #28 on: April 17, 2020, 03:48:01 pm »
Mulberry I assume back of bow?  Should my hickory of been the same? I more less just took bark off it.

Offline dylanholderman

  • Member
  • Posts: 787
Re: Hedge/Osage stave storage **** updated with haul load
« Reply #29 on: April 17, 2020, 04:26:26 pm »
do you have a better pic of the bark on that one? it doesn't look like mulberry to me.