« previous next »
Pages: [1]

Author Topic: Fixing lateral bend?  (Read 1003 times)

0 Members and 1 Guest are viewing this topic.

Offline Likemp

  • Member
  • Posts: 31
Fixing lateral bend?
« on: April 07, 2020, 03:01:17 pm »
One of the limbs on the BL pyramid bow I am working on starts swinging off the right (or left depending on which way you look at it) about halfway down the limb, ending with the tip being off center by a bit over an inch.  Whats the best way to correct this? Are there more benefits to using dry heat or steam for fixing such a bend? I'm probably over thinking this.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Fixing lateral bend?
« Reply #1 on: April 07, 2020, 03:24:37 pm »
Heat up the area right where it starts to bend with your heat gun, maybe a few minutes on high over a 4" area. Over bend it by about 10-15% and it should pop right in there where you want it.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Fixing lateral bend?
« Reply #2 on: April 07, 2020, 03:38:51 pm »
+2   BL reacts well with heat correction.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bushboy

  • Member
  • Posts: 2,256
Re: Fixing lateral bend?
« Reply #3 on: April 07, 2020, 05:04:58 pm »
For example.the cloth is wet to protect the back from reflected heat.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Fixing lateral bend?
« Reply #4 on: April 07, 2020, 07:04:56 pm »
Perfect pic bushy.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline TimBo

  • Member
  • Posts: 1,047
Re: Fixing lateral bend?
« Reply #5 on: April 07, 2020, 10:19:51 pm »
I am going to try that setup on a couple of staves I had given up on.  It looks simple but effective. 
Logged

Offline Likemp

  • Member
  • Posts: 31
Re: Fixing lateral bend?
« Reply #6 on: April 08, 2020, 08:12:08 am »
Ya, that setup looks a bit better than what I jury-rigged.  But I got it done! Thanks for the quick responses, a little bacon grease and some time with the heat gun got it nice and straight.  I like how you have it clamped down flat and then pull it sideways to avoid twisting, as opposed to hanging weights, which I had a hell of time trying to counter its attempt to twist.  Thanks!!
Logged
Pages: [1]
« previous next »