« previous next »
Pages: [1]

Author Topic: Ash b osage recurve  (Read 1130 times)

0 Members and 2 Guests are viewing this topic.

Offline snedeker

  • Member
  • Posts: 905
Ash b osage recurve
« on: March 26, 2020, 09:38:54 am »
Hi there.  This is one of my periodic check ins.   I made this 62" long, ash backed osage, slightly r/d w curved tips.  tillered to 55# at 27.- months ago.
After some shooting recently I noticed that the lower limb took on a bit of set relative to the upper limb.  Hard to see in this pic where lower limb is on top.  I notice the bow is cocked a bit  relatively to the floor tile line I used.

But its pretty noticeable when held in the hand.     It is all finished and everything and has taken on a nice darkened patina.  I was thinking a 1/2 inch taken off the lower limb might do it.  Opinion?

Dave
« Last Edit: March 26, 2020, 09:46:58 am by snedeker »
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Ash b osage recurve
« Reply #1 on: March 26, 2020, 10:02:08 am »
I see a "kink" at the upper(lower :D) fade. I don't know how to fix that. Can we have an unbraced picture?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Ash b osage recurve
« Reply #2 on: March 26, 2020, 10:36:50 am »
The top looks very flat. If your reflex is slight then that limb should look more like the lower. I wouldn't suggest making it stiffer by cutting it, I would tiller it.
« Last Edit: March 27, 2020, 05:33:26 am by PEARL DRUMS/PEARLY/PD/DRUMS »
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline snedeker

  • Member
  • Posts: 905
Re: Ash b osage recurve
« Reply #3 on: March 26, 2020, 10:41:53 am »
I see that but wonder if it is optically caused buy the back touching the tile line there.   I'll try some other picks.
Logged

bownarra

  • Guest
Re: Ash b osage recurve
« Reply #4 on: March 27, 2020, 12:44:41 am »
Impossible to tell without seeing it unbraced, really also without knowing the glue-up profile I can't tell where the set is.
If you really don't want to alter the patina you could cut a half inch off the weaker limb BUT you would still have a 'new' looking tip after re-fitting an overlay, cutting string grooves, sanding etc.
Logged

Offline snedeker

  • Member
  • Posts: 905
Re: Ash b osage recurve
« Reply #5 on: March 27, 2020, 12:06:29 pm »
I'll try to get some better shots.   But I think it looks fine un-braced.  I had the usual problem of needing to scrape down the lower limb a lot at the end. Maybe went a bit too far and it didnt show until the bow worked a little bit.  I don't recall it happening before.  And I am on bow 100+

I figure I can live with a little color change on just the tip area
Logged
Pages: [1]
« previous next »